Abstract:The toxic Cr(VI) contaminating water released from the metallurgical, dyeing, and electroplating industries is getting worse day by day and is extremely hazardous to human health. Thus, the development of a cost-effective, quick, and efficient adsorbent is highly essential for the Cr(VI) decontamination from wastewater. Herein, a microwave-assisted carbon-based composite called Mg-Fe LDH@OPAC was prepared by assembling Mg-Fe LDH onto orange peel-activated carbon (OAPC). Prior to investigating deeply into the adsorption behavior of the composite, the Mg-Fe LDH@OPAC formation was confirmed by using instrumental techniques like FESEM, EDS, Zeta potential, XRD, FTIR, Raman, XPS, and BET analyzer. The material had a high surface area of 143.9 m 2 /g and showed a good monolayer Langmuir uptake capacity of 118.36 mg/g. Under ideal circumstances, the maximum amount of Cr(VI) was removed within just 120 min and showed high efficiency in the presence of other coexisting anions respectively. The adsorption was accounted by pseudo-second-order kinetics and spontaneous in nature. Ultimately, a possible adsorption mechanism was suggested, confirmed by XPS studies; which showed that oxidation-reduction, electrostatic interaction, and surface complexation reaction were responsible for Cr(VI) adsorption on Mg-Fe LDH@OPAC surface. Environmental contaminants like Cr(VI) in drinking water are highly toxic, and their long-term persistence in the water environment causes mutagenic effects on human beings. We present a novel material for the first time (yet not been reported) by intercalating activated carbon (from a low-cost wedge of orange peel) into Mg-Fe layered double hydroxide (abbreviated as Mg-Fe LDH@OPAC), which has superior hazardous hexavalent chromium metal uptake capability. With the order of SO 4 2- >F - >CO 3 2- >I - >PO 4 3- >NO 3 - the as-prepared Mg-Fe LDH@OPAC exhibits strong selectivity toward Cr(VI) in the presence of varied competing ions with a modest drop in removal effectiveness. The combined properties of AC and LDH make Mg-Fe LDH@OPAC potentially efficient adsorbent to remove Cr(VI) from the different water sources and potentially applied in wastewater treatment.

Preparation of composites with MgAl-LDH-modified commercial activated carbon for the quick removal of Cr(VI) from aqueous solutions

Effective adsorption of Cr(VI) from aqueous solution by Mg-Fe LDH supported on orange peel activated carbon: isotherm, kinetic, thermodynamics and mechanism studies

Effective adsorptive uptake of hexavalent chromium ions from aqueous systems utilizing a superior activated nanobentonite@cobalt ferrite@carboxymethylcellulose nanocomposite

Nano-Porous Composites of Activated Carbon–Metal Organic Frameworks (Fe-BDC@AC) for Rapid Removal of Cr (VI): Synthesis, Adsorption, Mechanism, and Kinetics Studies

Amino-modified magnetic glucose-based carbon composites for efficient Cr(VI) removal

The Preparation of a Lignosulfonate/Chitosan–Graphene Oxide Hydrogel Biosorbent to Effectively Remove Cr(VI) from Wastewater: Adsorption Performance and Mechanisms

Efficient Removal of Eriochrome Black T (EBT) Dye and Chromium (Cr) by Hydrotalcite-Derived Mg-Ca-Al Mixed Metal Oxide Composite

Fe(III) Complexed Polydopamine Modified Mg/Al Layered Double Hydroxide Enhances the Removal of Cr(VI) from Aqueous Solutions

Self-assembled morphology-controlled hierarchical Fe3O4 @LDH for Cr(VI) removal

Efficient removal of hexavalent chromium from wastewater using a novel sodium alginate-biochar composite adsorbent

Research on the removal of Cr(VI) ions from wastewater by Mg/Al-layered double oxides

MgAl-NO3 LDH: Adsorption Isotherms and Multivariate Optimization for Cr(VI) Removal

Ultrasonic-assisted preparation of interlaced layered hydrotalcite (U–Fe/Al-LDH) for high-efficiency removal of Cr(VI): Enhancing adsorption-coupled reduction capacity and stability

Industrial waste against pollution: Mill scale-based magnetic hydrogel for rapid abatement of Cr(VI)

Adsorption of Cr(VI) on calcined MgAl-layered double hydroxides and recycling of spent adsorbents for the removal of organic dyes

Removal of hexavalent chromium from contaminated soil and water by Mg/Fe layered double hydroxide and its composite with biochar

Fabrication of Carbon–Alumina Composites via Catalytic Pyrolysis of Pine Sawdust on Aluminum Dross for Cr(VI) Removal

Montmorillonite clay decorated with Al-Mg LDH as a strong and retrievable nanocomposite for decontamination of wastewater containing chromium(VI) and arsenic(III) toxic ions

Preparation of microbial agent immobilized composites for Cr(VI) removal from wastewater

Efficient Removal of Congo Red, Methylene Blue and Pb(II) by Hydrochar–MgAlLDH Nanocomposite: Synthesis, Performance and Mechanism

Optimized adsorption and effective disposal of Congo red dye from wastewater: Hydrothermal fabrication of MgAl-LDH nanohydrotalcite-like materials