Abstract:It is difficult and has been research focus to improve the accuracy and performance of the low order elements widely used in non-linear FEM analysis using incompatible mode. In this paper, the basic principles of EAS (The Enhanced Assumed Strain) method are systematically summarized, and the conditions to guarantee calculation convergence, the solution stability and the construction methods of the enhanced assumed strain interpolating function are elaborated in detail. The research methods and achievements about the incompatible mode geometrically non-linear FEM in China are reviewed, which include: 1) a convergence criteria of incompatible mode geometrically non-linear FEM was proposed based on Hellinger-Reissner generalized variational principle, and the simplified model of incompatible geometrically non-linear FEM was constructed by using some simplified methods; 2) a class of non-linear generalized variational principles was proposed, in which the compatible conditions between elements are relaxed. The incompatible models can be constructed by selecting incompatible functions without satisfying compatible conditions prior and the convergence can be guaranteed. The C1 or C0 geometrically non-linear generalized hybrid elements, C1 or C0 refined hybrid elements and directly refined stiffness methods can be constructed by applying the non-linear generalized variational principles. The problems with respect to the application of EAS method in the non-linear FEM analysis are pointed out, that is, the restriction of constitutive laws and the solving methods. Furthermore, the application prospect of the incompatible mode non-linear FEM is discussed.

Improvement of Finite Element Analysis of Calibration Coefficients for Hole-Drilling Method by General Axisymmetric Elements

Research on Finite Element Calibration Technology of Calibration Coefficients in Hole-drilling Method

Finite Element Modelling of Thin-Walled Members in Overall Stability Analysis

Improved Bhs Element in Finite-Element Method Analysis of the Fracture Problem

On the Sensing and Calibration of Residual Stresses Measurements in the Incremental Hole-Drilling Method

Improved hole and tube elements in BEM for elasticity problems

Study on Physical Mechanisms of Thickness Effect of Incremental Hole-Drilling Method Based on Energy Analysis

Analytical model for measurement of through-thickness axisymmetric radial residual stress

An Improved Crack-Tip Element Treatment for Advanced FEMs

NONLINEAR FINITE ELEMENT ANALYSIS FOR THE ULTIMATE STRENGTH OF MULTIPLANNAR TUBULAR JOINT

Definite Element Analysis of the Cold-Expanded Hole with Split-Sleeve in Three Dimensions

Strategy to Improve Computation Precision in Inverse Analysis Method of Sheet Metal Stamping

Application of the Quadrilateral Area Co‐ordinate Method: a New Element for Mindlin–Reissner Plate

Three-dimensional Finite Element Analysis of the Mechanical Properties of Helical Thread Connection

NEW GENERALIZED CONFORMING AXISYMMETRIC ELEMENTS BASED ON THE QUADRILATERAL AREA COORDINATE METHOD

3D Finite Element Simulation and Experiment of Residual Stress on the Cutting Surface

A Simple Unsymmetric 4‐node 12‐DOF Membrane Element for the Modified Couple Stress Theory

THE STATE-OF-THE-ART OF INCOMPATIBLE MODE OF NON-LINEAR FEM AND THE ISSUES

A Calculation Method for Residual Stress of Cold Expanded Hole Based on Measured Springback

High-Performance Geometric Nonlinear Analysis With The Unsymmetric 4-Node, 8-Dof Plane Element Us-Atfq4

Measurement of Non-Uniform Residual Stresses by Combined Moiré Interferometry and Hole-Drilling Method: Theory, Experimental Method and Applications