Abstract:Abstract Background Commonly, polymer foil-based strain gauges are used for the incremental hole drilling method to obtain residual stress depth profiles. These polymer foil-based strain gauges are prone to errors due to application by glue. For example zero depth setting is thus often erroneous due to necessary removal of polymer foil and glue. This is resulting in wrong use of the calibration coefficients and depth resolution and thus leading to wrong calculations of the obtained residual stress depth profiles. Additionally common polymer foil-based sensors are limited in their application regarding e.g. exposure to high temperatures. Objective This paper aims at a first step into the qualification of directly deposited thin film strain gauges for use with the incremental hole drilling method. With the directly deposited sensors, uncertainties regarding the determination of calibration coefficients and zero depth setting due to the absence of glue can be reduced to a minimum. Additionally, new areas of interest such as the investigation of thermally sprayed metallic layers can be addressed by the sensors due to their higher temperature resilience and their component inherent minimal thickness. Methods For the first time, different layouts of directly deposited thin film strain gauges for residual stress measurements were manufactured on a stainless steel specimen. Strain measurements during incremental hole drilling using a bespoke hole drilling device were conducted. Residual stress depth profiles were calculated using the Integral method of the ASTM E837 standard. Afterwards, strain measurements with conventional polymer foil-based strain gauges during incremental hole drilling were conducted and residual stress depth profiles were calculated accordingly. Finally the obtained profiles were compared regarding characteristic values. Results The residual stress depth profiles obtained from directly deposited strain gauges generally match the ones obtained from conventional polymer foil based strain gauges. With the novel strain gauges, zero depth setting is simplified due to the absence of glue and polymer foil. With the direct deposition, a wide variety of rosette designs is possible, enabling a more detailed evaluation of the strain field around the drilled hole. Conclusions The comparative analysis of the obtained residual stress depth profiles shows the general feasibility of directly deposited strain gauges for residual stress measurements. Detailed investigations on uncertainty sources are still necessary.

Research on Finite Element Calibration Technology of Calibration Coefficients in Hole-drilling Method

Kinematic Modeling and Parameter Identification of A New Circumferential Drilling Machine for Aircraft Assembly

On the Sensing and Calibration of Residual Stresses Measurements in the Incremental Hole-Drilling Method

Improvement of Finite Element Analysis of Calibration Coefficients for Hole-Drilling Method by General Axisymmetric Elements

Study on Physical Mechanisms of Thickness Effect of Incremental Hole-Drilling Method Based on Energy Analysis

Three calibration methods for ductile fracture criterion parameters

Residual Stresses from Incremental Hole Drilling Using Directly Deposited Thin Film Strain Gauges

Study on the Size Dependence of Calibration Parameters of the New Local Approach Model for Cleavage Fracture

An Improved Method for Calibration of Beremin Model Parameters

Research on a Precision Calibration Model of a Flexible Strain Sensor Based on a Variable Section Cantilever Beam

Parameter Calibration of Ductile Fracture Criterion Considering Computational Efficiency and Accuracy

Research Progress on the Calibration Methods for Elastic Constant of Atomic Force Microscopy Cantilevers

Regularization of Hole-Drilling Residual Stress Measurements with Eccentric Holes: An Approach with Influence Functions

Calibration of micromechanical fracture model parameters for Q355B steel and ER50–6 welds

Calibration Methods for Elastic Constant Kn of a SPM Cantilever

Large Fixture Calibration Method Based on Point Cloud Scanning for Robotic Drilling

Calibration of the microparameters of the discrete element method using a relevance vector machine and its application to rockfill materials

Improved Calibration Method For Lateral Force Of The Cantilever Deflection Force Sensor In Atomic Force Microscope

Calibration Model Optimization for Strain Metrology of Equal Strength Beams Using Deflection Measurements

Integration of Finite Element Analysis and Laboratory Analysis on 3D Models for Methodology Calibration

Calibration for a Robotic Drilling System with Secondary Encoders Based on a Novel Enhanced Rigid-Flexible Coupling Model.