Abstract:By simply improving the first version of hybrid stress element method proposed by Pian, several 8- and 12-node plane quadrilateral elements, which are immune to severely distorted mesh containing elements with concave shapes, are successfully developed. Firstly, instead of the stresses, the stress function ϕ is regarded as the functional variable and introduced into the complementary energy functional. Then, the fundamental analytical solutions (in global Cartesian coordinates) of ϕ are taken as the trial functions for 2D finite element models, and meanwhile, the corresponding unknown stress-function constants are introduced. Thus, the resulting stress fields must be more reasonable because both the equilibrium and the compatibility relations can be satisfied. Thirdly, by using the principle of minimum complementary energy, these unknown stress-function constants can be expressed in terms of the displacements along element boundaries, which can be interpolated directly by the element nodal displacements. Finally, the complementary energy functional can be rewritten in terms of element nodal displacement vector, and thus, the element stiffness matrix of such hybrid stress-function (HS-F) element is obtained. This technique establishes a universal frame for developing reasonable hybrid stress elements based on the principle of minimum complementary energy. And the first hybrid stress element proposed by Pian is just a special case within this frame. Following above procedure, two 8-node and two 12-node quadrilateral plane elements are constructed by employing different fundamental analytical solutions of Airy stress function. Numerical results show that, the 8-node and 12-node models can produce the exact solutions for pure bending and linear bending problems, respectively, even the element shape degenerates into triangle and concave quadrangle. Furthermore, these elements do not possess any spurious zero energy mode and rotational frame dependence.

Improved Bhs Element in Finite-Element Method Analysis of the Fracture Problem

A New Five-Node Locking-Free Quadrilateral Element Based On Smoothed Fem For Near-Incompressible Linear Elasticity

A three-dimensional formula for determining stress intensity factors in finite element analysis of cracked bodies

Numerical Comparison of Two Boundary Element Methods for Plane Harmonic Functions

An Improved Crack-Tip Element Treatment for Advanced FEMs

Discontinuous patch tests in Hansbo and Hansbo's type of methods

An Improved Quadrature Scheme in B-spline Material Point Method for Large-Deformation Problem Analysis

H-Adaptive Enhanced Finite Element Method for Plane Problems

AN H-Type ADAPTIVE FINITE ELEMENT

Improvement of boundary aberration and computation efficiency in meshless method

Improved hole and tube elements in BEM for elasticity problems

A Consistency-Check Based Algorithm for Element Condensation in Augmented Finite Element Methods for Fracture Analysis

Penalty C0 8-node quadrilateral and 20-node hexahedral elements for consistent couple stress elasticity based on the unsymmetric finite element method

A 4-Node Hybrid Stress-Function (HS-F) Plane Element with Drilling Degrees of Freedom Less Sensitive to Severe Mesh Distortions

A hybrid-stress element based on Hamilton principle

8- and 12-node plane hybrid stress-function elements immune to severely distorted mesh containing elements with concave shapes

A Novel Hybrid Stress-Function Finite Element Method Immune to Severe Mesh Distortion

A Structured Grid Based B-Spline Finite Elements Method Combining Local Isogeometry Analysis Technique for Crack Problems

An Unsymmetric 8‐node Hexahedral Element with High Distortion Tolerance

Quadratic solid–shell elements for nonlinear structural analysis and sheet metal forming simulation

Hexahedral Solid Element with Rotational Degrees of Freedom Based on a Novel Trail-Correction Displacement Interpolation Scheme