Abstract:Flame atomic absorption spectrometry (FAAS) still keeps its importance despite the relatively low sensitivity; because it is a simple and economical technique for determination of metals. In recent years, atom traps have been developed to increase the sensitivity of FAAS. Although the detection limit of FAAS is only at the level of µg/mL, with the use of atom traps it can reach to ng/mL. Slotted quartz tube (SQT) is one of the atom traps used to improve sensitivity. In atom trapping mode of SQT, analyte is trapped on-line in SQT for few minutes using ordinary sample aspiration, followed by the introduction of a small volume of organic solvent to effect the revolatilization and atomization of analyte species resulting in a transient signal. This system is economical, commercially available and easy to use. In this study, a sensitive analytical method was developed for the determination of lead with the help of SQT atom trapping flame atomization (SQT-AT-FAAS). 574 Fold sensitivity enhancement was obtained at a sample suction rate of 3.9 mL/min for 5.0 min trapping period with respect to FAAS. Organic solvent was selected as 40 µL of methyl isobutyl ketone (MIBK). To obtain a further sensitivity enhancement inner surface of SQT was coated with several transition metals. The best sensitivity enhancement, 1650 fold enhancement, was obtained by the Ta-coated SQT-AT-FAAS. In addition, chemical nature of Pb species trapped on quartz and Ta surface, and the chemical nature of Ta on quartz surface were investigated by X-ray photoelectron spectroscopy (XPS) and Raman Spectroscopy. Raman spectrometric results indicate that tantalum is coated on SQT surface in the form of Ta2O5. XPS studies revealed that the oxidation state of Pb in species trapped on both bare and Ta coated SQT surfaces is +2. For the accuracy check, the analyses of standard reference material were performed by use of SCP SCIENCE EnviroMAT Low (EU-L-2) and results for Pb were to be in good agreement with the certified value using SQT-AT-FAAS and Ta coated-SQT.

Flame Atomic Aabsorption Spectrometric Determination of Gold by Solid Phase Extraction Using Modified Nanometer Titanium Dioxide as Sorbent

Study on determination of gold by solid phase extraction and flame atomic absorption spectrometry with graphitized carbon black loaded 5-(2-hydroxy-5-nitrophenylazo) thiorhodanine as sorbent

Highlights from Recent Literature

Determination Of Gold In Ore By Flame Atomic-Absorption Spectrometry With Flow-Injection Online Sorbent Extraction Preconcentration

Solid phase extraction of gold(III) on silica gel modified with benzoylthiourea prior to its determination by flame atomic absorption spectrometry

Investigation of Dispersive Solid-Phase Extraction Combined with Slurry Sampling Thermospray Flame Furnace Atomic Absorption Spectrometry for the Determination of Cadmium

Study on the solid phase extraction and spectrophotometric determination of gold with 4-hydroxy-1-naphthalrodanine

Flame Atomic Absorption Determination of Lead in Biological Materials Using A Flow Injection On-Line Separation and Preconcentration System Based on Ion-Pair Sorbent Extraction

Flame atomic absorption spectrometric determination of silver in geological materials using a flow-injection system with on-line preconcentration by coprecipitation with diethyldithiocarbamate

Resonance Rayleigh-scattering Spectrometric Determination of Trace Gold

Preparation of Orange-Red Fluorescent Gold Nanoclusters Using Denatured Casein As a Reductant and Stabilizing Agent, and Their Application to Imaging of HeLa Cells and for the Quantitation of Mercury(ii)

Study on the On-Line Measurement of Au in Gold Ores by Microwave Dissolving-Flow Injection-Spectrophotometry

FLAME ATOMIC ABSORPTION SPECTROPHOTOMETRY DETERMINATION OF GALLIUM EXTRACTED BY BUTYL ACETATE

Direct analysis of titanium dioxide solid powder by fluorination assisted electrothermal vaporization inductively coupled plasma atomic emission spectrometry

Gold Determination by Electrothermal Atomic Absorption Spectrometry After Preconcentration Using Natural Deep Eutectic Solvent Based on Menthol and Camphor

The extraction of low-concentrations of gold(I) with 198Au as a radiotracer

Lead determination at ng/mL level by flame atomic absorption spectrometry using a tantalum coated slotted quartz tube atom trap

The Extraction Of Low-Concentrations Of Gold(I) With Au-198 As A Radiotracer

FAAS Determination of Trace Amounts of Silver by Standard Addition

Determination of Tellurium in Lead Tellurium Residue Sample by Flame Atomic Absorption Spectrometry

Determination of Cu, Zn and Fe in Huaiyao by suspension sampling-flame atomic absorption spectrometry]