Abstract:Image 1 Microchips are intensively used in almost all nowadays electronic devices. With the continuous advancement of our technologies, they get smaller in size than ever before. They generate high-intensity heat loads that need to be transported effectively such that they may function properly. Heat pipes have proven to be very effective in transporting relatively large heat loads from miniature components. They are of seamless structure that involves a working fluid capable of evaporation and condensation at the working temperature of the electronic chips. The working fluid is derived to move from the condenser to the evaporator via multiple microgrooves using capillary forces. It is important that the condensate reaches the evaporator at a proper rate such that no dry-out or flooding occur. In this work, we are particularly interested in the case of capillary-driven flows in rectangular microchannels. A generalized model is developed that works for axe-symmetric rectangular channels of arbitrary, moderately varying width profiles. It also accounts for any contrast of viscosity between the liquid and the vapor under isothermal conditions. The model shows to reduce to the special case of imbibition in straight and uniform microchannels, for which comparisons with experimental and modeling works show an excellent match. Cases representing linearly and quadratically varying converging/diverging width profiles have been explored. It is found that the viscosity ratio has a significant influence on the rate at which the meniscus advances. The model also negates the common practice found in the literature of using the formula developed for imbibition rates in capillary tubes for rectangular microchannels by replacing the diameter of the tube with the hydraulic diameter. It is also found that the channel profile has an influential effect on the imbibition rates. For tapered microchannels, the capillary force increases along the channel length while it decreases for diverging ones. It is interestingly demonstrated that, for quadratically tapered microchannel, the speed of the meniscus increases towards the end of the microchannel compared with linearly varying microchannels. On the other hand, for diverging microchannels, the speed of the meniscus decreases due to the increase in the cross-sectional area. Computational fluid dynamics (CFD) analysis has been conducted to provide a framework for confirmation and verification for which very good match has been established, which builds confidence in the modeling approach.

Flow Modeling and Experimental Verification of Flow Resistors Used in Microfluidic Chips Driven by Capillary Force

Flow Characteristics of Fluids in a Microchannel Driven by Hydrostatic Pressure

SIMULATION AND MICRO-PIV RESEARCH ON CLASSICAL MICROCHANNEL FLOW

Flow-restricted Etching Method on Isotropic Substrates and Its Mechanism

Experimental and Numerical Research on the Flow in Microchannel with Barriers

A simple method for the evaluation of microfluidic architecture using flow quantitation via a multiplexed fluidic resistance measurement

Design of Microfluidic Channel Networks with Specified Output Flow Rates Using the CFD-based Optimization Method

Micro Etching Method Inside Microchannels

Study On Characteristics Of Interface Between Multiple Laminar Streams And Application For Secondary Etching Inside Microchannels

An empirical model for lateral flow in horizontally stratified flows

Effect of Flow Velocity on Laminar Flow in Microfluidic Chips

A Mathematical Model of Mixing Enhancement in Microfluidic Channel with a Constriction under Periodic Electro-Osmotic Flow

A modeling approach for capillary-driven flow of a wetting fluid in a rectangular open microchannel of arbitrary axisymmetric width profile: Application to heat pipes

Simulation of Pressure-Driven and Channel-Based Microfluidics on Different Abstract Levels: A Case Study

Rational design of capillary-driven flows for paper-based microfluidics

Using the improved DSMC method to predict the reliability of micro-flow channels

Experimental and Numerical Studies of Fluid Flow Confined in Microchannel

Realizing the multifunctional microfluidic flow manipulation based on hydrodynamic metamaterials

Using Electrical Resistance to Characterize the Flow Parameters of the Solution in Micro/Nano Fluidics Channel

Experimental and theoretical investigation of a low-Reynolds-number flow through deformable shallow microchannels with ultra-low height-to-width aspect ratios

Design and Testing of Micro Fluidic Chemical Analysis Chip Integrated with Micro Valveless Pump