Abstract:In the present study, water-oil flow patterns and slug hydrodynamics were experimentally studied in square glass microchannels with various hydraulic diameters (Dh = 600 μm, 400 μm, 200 μm). The aqueous phase is the continuous phase while the organic phase is the dispersed phase. The ranges of flow rates of the continuous phase and the dispersed phase are 0–200 ml/h and 0–12 ml/h, 0–120 ml/h and 0–6 ml/h, and 0–60 ml/h and 0–2 ml/h in the microchannels with Dh = 600 μm, 400 μm and 200 μm, respectively. The results show that the hydraulic diameter has significant effects on flow patterns and three main flow patterns are observed, i.e., annular flow, slug flow and droplet flow. Generally, annular flow appeared at high flow rates of the dispersed phase and low flow rates of the continuous phase, while droplet flow appeared at low flow rates of the dispersed phase and high flow rates of the continuous phase. However, slug flow existed at comparable flow rates of the continuous and dispersed phases. A dimensionless analysis is carried out and a new dimensionless group including Weber number and Reynolds number is derived. The new defined dimensionless group performs well to develop a general flow pattern map. In addition, slug flow hydrodynamics are investigated as well in the present study, considering the slug length and slug velocity. Based on the present experimental results, a new scaling law is proposed to predict the slug length and it shows a good agreement with the experimental results. It has been widely reported that slug velocities depend linearly on the total flow rates of the two phases, which is consistent with the present study. The linear law provides a good prediction of the experimental slug velocities but different slopes are suggested in microchannels with different hydraulic diameters.

Flow Characteristics of Fluids in a Microchannel Driven by Hydrostatic Pressure

PRESSURE FLUCTUATIONS OF LIQUID-LIQUID SLUG FLOW IN CROSS-JUNCTION SQUARE MICROCHANNELS

Micro-fluid Flow in Microchannel

Flow and Heat Transfer Characteristics in a Microchannel with a Circular Synthetic Jet

WATER-OIL FLOW IN SQUARE MICROCHANNELS WITH A CROSSED JUNCTION

SIMULATION AND MICRO-PIV RESEARCH ON CLASSICAL MICROCHANNEL FLOW

Study On Characteristics Of Interface Between Multiple Laminar Streams And Application For Secondary Etching Inside Microchannels

Experimental and Numerical Research on the Flow in Microchannel with Barriers

Flow Regulation Performance Analysis of Microfluidic Passive Valve for High Throughput Liquid Delivery

Impact of flow feedback on bubble generation in T-junction microchannels under pressure-driven condition

Experimental Investigation on Submerged Gas-Liquid Mixture Injection into Water Through A Micro-Channel

Relationship Between Dimension and Diffusion in Pressure Driven Micro-Channel Flows

Steady Flow of Pressure-Driven Water-in-oil Droplets in Closed-Open-closed Microchannels

Flow Modeling and Experimental Verification of Flow Resistors Used in Microfluidic Chips Driven by Capillary Force

Pressure Drop Analysis for the Droplet Break-Up Flow in a Locally Constrictive Microchannel

Mathematical Model for Flow of High-pressure Gas in Microscale

Microchannel Flow Measurement Using Micro Particle Image Velocimetry

Head Loss and Flow Characteristics for Turning Flow Driven by Surface Tension Force Inside Open Microchannel

Study of two-phase flow characteristics in the interrupted microchannels

On-chip micro pressure sensor for microfluidic pressure monitoring