Abstract:Splitting droplets is becoming a major functional component in increasing number of droplet microfluidic applications, and there is an increasing interest in splitting droplets into two daughter droplets with different volumes. However, designing an asymmetric droplet splitter and predicting how a droplet splits in such designs is not trivial. In this study, numerical simulations were conducted to study droplet breakup in asymmetric T-junctions of square cross-sections having different pressure gradient ratios (i.e. T-junctions with outlet branches of different lengths). The goal of the simulation is to identify the conditions where a parent droplet breaks or does not break into two smaller droplets of different sizes (so called critical condition) and to identify the important fluid and microchannel parameters in this process. Four modes of droplet breakup (primary-, transition-, bubble-, and non-breakups) are identified and an empirical correlation is introduced that can predict the breakup/non-breakup of the droplet based on the parent droplet size and the capillary number. The simulation results are then compared with experimental data to verify its accuracy and the effect of fluids properties on the proposed correlation are studied. Two major asymmetric breakup mechanisms are determined, namely "breakup with permanent obstruction" and "unstable breakup". The numerical results show that the splitting ratio for the asymmetric breakup mechanisms depends on flow conditions and dwell time of the droplet at the junction prior to splitting. Finally, the results from two-dimensional and three-dimensional simulations were compared. It is shown that two-dimensional simulation may not accurately predict the breakup behavior for asymmetric droplet breakup and viscosity ration has a greater effect on the prediction critical condition.

Pressure Drop Analysis for the Droplet Break-Up Flow in a Locally Constrictive Microchannel

Pressure drop-based determination of dynamic interfacial tension of droplet generation process in T-junction microchannel

Experimental Study on Droplet Breakup in an Orifice Jet Mixer

Exploration of Shock–droplet Interaction Based on High-Fidelity Simulation and Improved Theoretical Model

Study on “interface – Shrinkage – Driven” Breakup of Droplets in Co-Flowing Microfluidic Devices

Theoretical analysis and simulation of obstructed breakup of micro-droplet in T-junction under an asymmetric pressure difference

Inner circulation flow characteristics of coalescence droplets in microchannel

Prediction of Microdroplet Breakup Regime in Asymmetric T-Junction Microchannels

Interface‐shrinkage‐driven Breakup of Droplets in Microdevices with Different Dispersed Fluid Channel Shape

Modeling of Droplet Traffic in Interconnected Microfluidic Ladder Devices

Droplet behavior and its effects on flow characteristics in T-junction microchannels

Numerical Simulation of Junction Point Pressure During Droplet Formation in a Microfluidic T-junction

A geometrical criterion for the dynamic snap-off event of a non-wetting droplet in a rectangular pore–throat microchannel

Interaction and breakup of droplet pairs in a microchannel Y-junction

The Surfactant Role on a Droplet Passing through a Constricted Microchannel in a Pressure-Driven Flow: A Lattice Boltzmann Study

Breakup dynamics of nanofluid droplets in T-typed microchannels

Shear Force Induced Monodisperse Droplet Formation in a Microfluidic Device by Controlling Wetting Properties

Experimental and Numerical Study of Mixing Behavior Inside Droplets in Microchannels

Droplet breakup driven by shear thinning solutions in a microfluidic T-Junction

Numerical simulation of droplet formation in a Co-flow microchannel capillary device

Study of the Pressure Drop of Liquid–Liquid Slug Flow in a Circular Microchannel