Abstract:The utilization of T-junction microchannels with different lengths of branches is considered as the preferred method for asymmetric splitting to generate microdroplets with various sizes. In this study, a T-junction microfluidic chip with different-length branches is designed and an experimental platform is set up to visualize droplet asymmetric splitting in the chip, with a focus on elucidating microfluidic droplet asymmetric splitting behaviors. Through detailed analysis of the interface evolution and changing of the characteristic interface morphological parameters during the splitting process, the splitting flow patterns are clearly recognized and the underlying hydrodynamic mechanisms are revealed. Moreover, the influencing factors and their regulation rules on the asymmetric splitting volume ratios are also exposed. The results indicate that there are four types of flow patterns during droplet asymmetric splitting, i.e., splitting with obstruction and tunnel (SOT), splitting with tunnels and consequent droplets flowing in the opposite direction (ST-O), splitting with tunnels and consequent droplets flowing in the same direction (ST-S), and no splitting (NOS). A phase diagram of droplet splitting flow patterns is given. With the increasing initial droplet length for a given Capillary number, the splitting flow pattern experiences a transition from the NOS to the SOT through the ST-S and the ST-O. The splitting process comprises three distinct stages: the entering stage, the squeezing and splitting stage, and the post-splitting stage. During the squeezing and splitting stage, the competition of upstream continuous phase squeezing and interfacial tension causes asymmetric splitting by uneven shrinkage of the droplet neck. Additionally, it is found that the droplet final splitting volume ratio ( V l / V s ) increases with droplet length in the SOT flow pattern, while it decreases with droplet length in the ST-O and ST-S flow patterns. Importantly, the final V l / V s of the SOT pattern remains similar with increasing Ca for the same droplet length. However, the final V l / V s of the ST-O and ST-S pattern decreases with increasing Ca .

Theoretical analysis and simulation of obstructed breakup of micro-droplet in T-junction under an asymmetric pressure difference

Asymmetric droplet splitting in a T-junction under a pressure difference

Dynamics of Obstructed Droplet Breakup in Microfluidic T-junction Based on Diffuse Interface Method

Prediction of Microdroplet Breakup Regime in Asymmetric T-Junction Microchannels

Nanoliter-Droplet Breakup in Confined T-Shaped Junctions

Experimental Study on Droplet Breakup in an Orifice Jet Mixer

Hydrodynamics of a Droplet Passing Through a Microfluidic T-junction

Bubble Breakup in a Microfluidic T-junction

3D Numerical Simulation of Droplet Passive Breakup in a Micro-Channel T-junction Using the Volume-Of-Fluid Method

Dynamics of droplet breakup in unilateral Y-junctions with different angles

Droplet Breakup in an Asymmetric Bifurcation with Two Angled Branches

Three Dimensional Simulations of Droplet Formation in Symmetric and Asymmetric T-junctions Using the Color-Gradient Lattice Boltzmann Model

Breaking one into three: surface-tension-driven droplet breakup in T-junctions

Interaction and breakup of droplet pairs in a microchannel Y-junction

Droplet behavior and its effects on flow characteristics in T-junction microchannels

Numerical Simulation of Junction Point Pressure During Droplet Formation in a Microfluidic T-junction

Breakup Dynamics of Droplets in Symmetric Y-Junction Microchannels

Investigation on asymmetric splitting behavior of droplets through T-junction with different-length branches

Asymmetrical Breakup and Size Distribution of Droplets in a Branching Microfluidic T-junction

Pressure Drop Analysis for the Droplet Break-Up Flow in a Locally Constrictive Microchannel

Breakup Dynamics of Droplets in an Asymmetric Bifurcation by Μpiv and Theoretical Investigations