Abstract:The utilization of T-junction microchannels with different lengths of branches is considered as the preferred method for asymmetric splitting to generate microdroplets with various sizes. In this study, a T-junction microfluidic chip with different-length branches is designed and an experimental platform is set up to visualize droplet asymmetric splitting in the chip, with a focus on elucidating microfluidic droplet asymmetric splitting behaviors. Through detailed analysis of the interface evolution and changing of the characteristic interface morphological parameters during the splitting process, the splitting flow patterns are clearly recognized and the underlying hydrodynamic mechanisms are revealed. Moreover, the influencing factors and their regulation rules on the asymmetric splitting volume ratios are also exposed. The results indicate that there are four types of flow patterns during droplet asymmetric splitting, i.e., splitting with obstruction and tunnel (SOT), splitting with tunnels and consequent droplets flowing in the opposite direction (ST-O), splitting with tunnels and consequent droplets flowing in the same direction (ST-S), and no splitting (NOS). A phase diagram of droplet splitting flow patterns is given. With the increasing initial droplet length for a given Capillary number, the splitting flow pattern experiences a transition from the NOS to the SOT through the ST-S and the ST-O. The splitting process comprises three distinct stages: the entering stage, the squeezing and splitting stage, and the post-splitting stage. During the squeezing and splitting stage, the competition of upstream continuous phase squeezing and interfacial tension causes asymmetric splitting by uneven shrinkage of the droplet neck. Additionally, it is found that the droplet final splitting volume ratio ( V l / V s ) increases with droplet length in the SOT flow pattern, while it decreases with droplet length in the ST-O and ST-S flow patterns. Importantly, the final V l / V s of the SOT pattern remains similar with increasing Ca for the same droplet length. However, the final V l / V s of the ST-O and ST-S pattern decreases with increasing Ca .

Asymmetric branch selection and splitting of droplets in T-junction microchannels

Investigation on asymmetric splitting behavior of droplets through T-junction with different-length branches

Droplet behavior and its effects on flow characteristics in T-junction microchannels

Droplet Motions Directed by an Expansion Section in the T-junctions

Prediction of Microdroplet Breakup Regime in Asymmetric T-Junction Microchannels

Asymmetrical Breakup and Size Distribution of Droplets in a Branching Microfluidic T-junction

Droplet Generation at T-junctions in Parallelized Microchannels

Distribution of liquid-liquid two-phase flow in branching T-junction microchannels

Distribution of Liquid-Liquid Two-Phase Flow and Droplet Dynamics in Asymmetric Parallel Microchannels

Generation of Droplets in the T-junction with a Constriction Microchannel

Merged and Alternating Droplets Generation in Double T-junction Microchannels Using Symmetrically Inserted Capillaries

Dynamic mechanism of double emulsion droplets flowing through a microfluidic T-junction

Experimental Study and Multistage Design of Multiphase Droplets Splitting Based on T-junction Microchannels

Three Dimensional Simulations of Droplet Formation in Symmetric and Asymmetric T-junctions Using the Color-Gradient Lattice Boltzmann Model

Uniformity and stability of droplet formation at T-junctions in symmetrical microchannels

Simulations of Droplet Formation in A T-Junction Micro-Channel Using the Phase Field Method

Breaking one into three: surface-tension-driven droplet breakup in T-junctions

Numerical Study On Liquid Droplet Formation In T-Junction Microchannel

Hydrodynamics of a Droplet Passing Through a Microfluidic T-junction

Study on the mechanism of droplet formation in T-junction microchannel

Dynamics of Droplet Formation and Mechanisms of Satellite Droplet Formation in T-junction Microchannel