Abstract:Nano-porous silica aerogels are unique materials often having a high specific surface area, a high porosity (75-99%), a low thermal conductivity (0.01-0.03W/mK), and a low index of refraction. Because of their unique properties, aerogels have been extensively studied, not only for use as transparent thermal insulators but also as inter-metal dielectric materials, optical and acoustic applications, and the space industry (Muller et.al, 1999; Hrubesh et.al, 2001;Kim & Hyun,2003;Lu et.al,1991). NASA has applied aerogel on the Mars Pathfinder Sojourner rover and Mars Exploration rovers for insulation purposes. Additional applications of aerogels are found in battery electrodes, catalysts and electronic devices (Fricke et.al, 1992; Fricke & Tillotson, 1997; Kuhn et.al, 1995; Chadwick et.al, 2001). Currently SiO2, Al2O3 and C aerogels are reported and available elsewhere. During the production of aerogel a wet gel is formed which dried becomes filled with air. An aerogel is made up of microscopic beads or strand chains connected to form a continuous network, it is considered a solid. The fact that typical aerogels have more than 90% porosity gives them unusual characteristics (Yoda et.al, 1998; Klementiev, 2001). Their structure is composed of a 3D connected network of channels made of thin ligaments. The thickness of ligaments determines the final density and porosity of the aerogel (Reim et al, 2004; Kwon & Choi, 2000). As for thermal insulation application, generally monolithic SiO2 aerogels provide a whole low thermal conductivity due to its extremely high porosity. The thermal conductivity of aerogels is about 100 times smaller than that of full density silica glass, although Kistler made initial thermal conductivity measurements, a detailed understanding of thermal transport in aerogel resulted from investigations carried out (Fricke & Tillotson, 1997). Thermal transport in aerogel occurs via gaseous conductivity, solid conductivity and infrared radiative transfer. Usually at room temperature, aerogels have a low thermal conductivity due to its special gas conduction and solid conduction. However, at higher temperatures, radiative absorption/emission becomes the dominant heat transfer mechanism. Monolithic aerogel behaves poor thermal insulation because it is highly transparent in the 3– 8μm wavelength region. To improve its thermal insulation capacity, approaches such as doping aerogel with carbon have been applied to minimize infrared radiation heat transfer. The specific extinction for C doped aerogels is drastically increased, especially in the 2 to

Development of SiO2/C and SiC/C Composites Featuring Aerogel Structures

Fabrication of the SiC/HfC Composite Aerogel with Ultra-Low Thermal Conductivity and Excellent Compressive Strength

Synthesis and Characterization of Silica Aerogel and Its Composite Materials

An Overview on Cellulose/silica Organic-Inorganic Hybrid Composite Aerogels

Evolution of the Novel C/SiO2/SiC Ternary Aerogel with High Specific Surface Area and Improved Oxidation Resistance

Preparation and Characterization of SiO2/Carbon Foam and SIC/Carbon Foam Composites

Fabrication of SiCN(O) Aerogel Composites with Low Thermal Conductivity by Wrapping Mesoporous Aerogel Structures over Mullite Fibers

Microstructure Characterization and Thermal Performance of Reticulated SiC Skeleton Reinforced Silica Aerogel Composites

Super Thermal Insulation SiC Aerogel with High Elasticity and Good Adsorption Performance Prepared by Constructing Coaxial Precursor

Hyperelastic and Multifunctional SiC/SiO2 Composite Aerogels with Excellent Mechanical, Thermal Insulation and Electromagnetic Wave Absorbing Properties

Hyperelastic and multifunctional SiC/SiO 2 composite aerogels with excellent mechanical, thermal insulation and electromagnetic wave absorbing properties

CHARACTERIZATION OF SiO2 AEROGELS/FIBER COMPOSITES PREPARED BY THE SOL-GEL METHODS

In-situ synthesis and textural evolution of the novel carbonaceous SiC/mullite aerogel via polymer-derived ceramics route

Advances in multiple reinforcement strategies and applications for silica aerogel

An Overview on Silica Aerogels Synthesized by Siloxane Co-precursors

Flexible and Compressible Nanostructure-Assembled Aramid Nanofiber/Silica Composites Aerogel

Robust Silica–Agarose Composite Aerogels with Interpenetrating Network Structure by in Situ Sol–Gel Process

Synthesis, Structural And Thermal Properties Of Nano- Porous Sio2-Based Aerogels

Preparation, mechanical, acoustic and thermal properties of silica composite aerogel using wet-laid glass fiber felt as scaffold

Synthesis and Heat Insulation Performance of Glass Fiber Reinforced SiO2 Aerogel Composites

Preparation of the Novel B4C–SiC Composite Aerogel with High Compressive Strength and Low Thermal Conductivity