Abstract:Abstract GLARE laminates have emerged as a favored option for the construction of fuselage and wing skins in large airliners, owing to their exceptional mechanical characteristics. Nevertheless, the incorporation of open‐hole designs poses a challenge as it disrupts the continuity of the laminates, resulting in stress concentration and subsequent damage. To investigate the impact of various layup orientations and hole sizes on the tensile properties of open‐hole GLARE laminates, this study conducted axial tensile tests. Additionally, the tensile damage process was monitored using DIC and AE techniques, enabling the identification of damage patterns and the analysis of their evolution. The results demonstrate a noteworthy decline in the ultimate strength and failure strain as the size of the opening increases. Moreover, the retention rate of failure strain displays a marked sensitivity to the layup orientation. In conjunction with observations made through DIC and SEM, the k‐means++ algorithm successfully clustered peak frequencies, thereby revealing distinct damage patterns and their corresponding frequency ranges as aluminum alloy damage [0–90 kHz], matrix cracking [104–174 kHz], fiber/matrix debonding [175–224 kHz], interlaminar delamination [234–300 kHz], and fiber fracture [304–469 kHz]. AE cumulative counts were utilized to evaluate the progression of individual damage modes. The results emphasize that matrix cracking demonstrates the most substantial cumulative counts, whereas damage to the fibers and aluminum alloy noticeably affects the load‐carrying capability of the laminate. Furthermore, the fibers/matrix debonding and interlaminar delamination, exhibit heightened susceptibility to layup orientation and hole size. Highlights The tensile performance evaluation of GLARE laminates with open‐hole varying layup orientations and hole sizes was investigated. A combination of DIC and AE techniques was used to monitor the tensile damage process. Damage pattern was identified based on the observations of DIC and SEM. An approach based on Pearson's correlation coefficient and k‐means++ clustering algorithm was used for damage pattern recognition in GLARE laminates. AE cumulative counts were employed to assess the evolution of each damage mode.

Experimental Investigation and Theoretical Analysis of Tear Propagation of GQ-6 Airship Envelope

Bi-axial tensile test method and analytical algorithm of elastic constants for the airship envelope fabric

Experimental studies on tear failure of PVC coated fabric

Experiments on the mechanical properties and the welded seam properties of architectural membranes

Mechanical properties analysis of architectural PVDF/PES fabrics with uni-tensile and bi-axial test

Mechanical Responses and Damage Morphology of Laminated Fabrics with a Central Slit under Uniaxial Tension: A Comparison Between Analytical and Experimental Results

Mechanical Properties and Strength Criteria of Fabric Membrane for the Stratospheric Airship Envelope

Impact response and damage evolution of triaxial braided carbon/epoxy composites. Part I: Ballistic impact testing

Tearing behaviors of coated fabric membrane structures

Experimental study and refined numerical simulation of ultimate pressure-bearing performance of rope-reinforced airship envelope structures

Quasi-static Axial Crushing and Transverse Bending of Double Hat Shaped CFRP Tubes

Off-axis tearing properties of the biaxial warp-knitted fabrics

Study on Mechanical Properties of High Performance Envelope Materials

Experimental investigation on the effects of fabric architectures on mechanical and damage behaviors of carbon/epoxy woven composites

Central tearing behavior of PVDF coated fabrics with multiple initial notches

Response Characteristics of Elastic Parameters of Woven Fabrics in Stress Space and a Nonlinear Constitutive Analysis

Micro-XCT Characterization and Numerical Analysis of Bending Damage Mechanism in Carbon Fiber Plain, Twill and Winding Composite Tubes

Assessment of tensile damage mechanism of open‐hole GLARE laminates based on acoustic emission and digital image correlation techniques

Analysis of the crushing behaviors of woven carbon fiber reinforced plastic hat section component under dynamic bending and axial crushing loading

Characterizing damage patterns and evolution in Multi-Hole GLARE laminates under tensile load via integrated AE and DIC techniques

Analysis of in-plane compression failure mechanism in carbon fiber braided composite with different off-axial angles