Abstract:For the explosive and strongly exothermic direct propene epoxidation with H 2 and O 2 to synthesize propylene oxide, maintaining uniform gas flow and moderate reaction in the packed bed reactor is of prime industrial and scientific significance. Herein, randomly packed beds of spherical particles were simulated with resolved particle 3D computational fluid dynamics (CFD) under industrial conditions. Effect of particle size (i.e., 6, 8 and 10 mm) on performance of gas-phase propene epoxidation was numerically simulated. The fluid flow and temperature fields were fully coupled to the species and reaction distribution, including reactions in the particles and on catalyst surface. Based on the results of velocity, pressure drop, temperature and species distribution, heat transfer together with catalytic performance inside the fixed bed reactor, it is found that PPD-6 (Packed Particle Diameter 6 mm) model has a more uniform flow distribution, higher thermal conductivity and a lower temperature compared with PPD-8 and PPD-10. In addition, as packed particle diameter increases, the heat transfer capacity reduces and the temperature rise increases. As a result, the maximum hot spot temperature for the PPD-6 model is about 3 and 8 K lower than PPD-8 and PPD-10 model, respectively. In addition, the PPD-6 model has a more uniform reaction rate within the particles compared with the PPD-8 and PPD-10 models due to short diffusion path and high mass transfer capacity. Therefore, the PPD-6 model shows superior safety together with optimum conversion and selectivity. This work harbors tremendous referential significance to the design and scale-up of industrial reactors for propene epoxidation.

Numerical Evaluation on the Intraparticle Transfer in Butylene Oxidative Dehydrogenation Fixed-Bed Reactor over Ferrite Catalysts

Multi-Scale Coupling Model Involving Bed and Catalyst Particle for MTP Reactor Simulation

Cstr Model for P-Xylene Oxidation Reactor

Heat Transfer Characteristics Analysis and Optimization of the Micro Packed Bed Bionic Reactor

CFD simulation of cross flow in multi-tubular fixed-bed reactor of industrial level

Porous-media model based particle-resolved simulation of a fixed bed with olefin catalytic cracking reaction

Trans-level multi-scale simulation of porous catalytic systems: Bridging reaction kinetics and reactor performance

Numerical calculation of flow and reaction safety with different particle sizes in a fixed bed reactor for propene epoxidation with H 2 and O 2

Numerical exploration of the flow regime transition of a novel catalytic cracking reactor and operation mode analysis

Multiscale Modeling and Simulation on Oxidative Dehydrogenation of Ethane to Ethylene

Experimental and simulation study of the temperature distribution in a bench‐scale fixed bed Fischer–Tropsch reactor

Heterogeneous Consecutive Reaction Kinetics of Direct Oxidation of H2 to H2O2: Effect and Regulation of Confined Mass Transfer

Studies and Discriminations of the Kinetic Models for the Iron-Based Fischer−Tropsch Catalytic Reaction in a Recycle Slurry Reactor

Comparison Study for the Oxidative Dehydrogenation of Isopentenes to Isoprene in Fixed and Fluidized Beds

Acetylene Hydrogenation Processes Studied Using CFD in a Packed Bed Reactor

Concerted oxygen diffusion across heterogeneous oxide interfaces for intensified propane dehydrogenation

Computational Fluid Dynamics Simulation of a High-Throughput Catalytic Fixed-Bed Reactor for Total Oxidation of Methane

Numerical simulation of commercial MTO fluidized bed reactor with a coarse-grained discrete particle method — EMMS–DPM

Modeling analysis of cobalt-based Fischer-Tropsch catalyst particles

Modeling of Oxidative Coupling of Methane for Manufacture of Olefins—Part I: CFD Simulations

Quantitative Evaluation of Coupling Effects of Pore Structures and Metal Loadings on Catalytic Hydrogenation of Tar Model Reactants over Sulfided NiMo/γ-Al2O3 Catalysts: Role of Segmented Catalytic Active Phase Volumes