Abstract:The Gleeble-1500D thermal simulator was used for the isothermal compression test of 21-4N heat-resistant steel under the T range of 1273–1453 K and <math>ε˙</math> of 0.01–10s−1. Using the obtained stress - strain data, various parameters of the Fields–Backofen (F-B), the modified F–B (m–F–B) equations and the modified Zerilli–Armstrong (m–Z–A) equations were calculated respectively. The constitutive equations of 21-4N heat-resistant steel based on the F–B, the m–F–B and the m–Z–A were established. Second, the predictive ability of the three constitutive equations were evaluated using the correlation coefficient (R), average absolute relative error (AARE) and the relative error (r). Third, the established model was imported into Deform-3D to simulate the valve forging process of 21-4N heat-resistant steel, and the distribution rules of the effective stress, effective strain, temperature and damage condition of the forging were analyzed. Finally, a hot forging experiment was performed on a 160t hot die forging press. Results show that the flow stress of 21-4N heat resistant steel is affected by temperature, strain rate and strain. The m–F–B and m–Z–A models can describe the rheological behavior of 21-4N heat-resistant steel, while the original F–B model has a high predictive ability, but only under low temperature, low strain rate and small deformation. The simulation process can be completed successfully, indicating that the established models can be used for the simulation study of the thermal deformation of 21-4N heat-resistant steel and all models are correct. The results can provide some important basic data for the simulation of 21-4N heat resistant steel in the plastic deformation process.

Finite element simulation of isothermal forging of complex component using constitutive relationship of 7A04 alloy

Constitutive modeling of deformation in high temperature of a forging 6005A aluminum alloy

Finite Element Modeling for Deep-Drawing of Aluminum Alloy Sheet 6014-T4 Using Anisotropic Yield and Non-Afr Models

On the effect of deformation conditions on the metal flow behavior during upsetting process using finite element simulation DEFORM 3D software

Three-Dimensional Finite Element Modelling of Forging of a Titanium Alloy Aerofoil Sectioned Blade

Deformation Characteristics and Constitutive Equations for the Semi-Solid Isothermal Compression of Cold Radial Forged 6063 Aluminium Alloy

Study on Hot Deformation Behavior and Bending Forging Process of 7075 Aluminum Alloy

A Physical-Based Plane Stress Constitutive Model for High Strength AA7075 under Hot Forming Conditions

Modeling of constitutive behavior and ductile fracture of AA5A06 aluminum alloy sheet in warm hydroforming process

SIMULATION ANALYSIS OF WHEEL BEARING FORGING PROCESS BASED ON DEFORM

Constitutive relationships of 21-4 N heat-resistant steel for the hot forging process

Simulation of CuE Copper Alloy in a Closed-Die Multi-Axial Forging Tool

Microstructure evolution, constitutive modeling and forming simulation of AA6063 aluminum alloy in hot deformation

Optimization of multi-directional forging parameters of large-scale Mg-Gd-Y-Zn-Zr alloy forged part guided by finite element simulation

Deformation Characteristics and Microstructure Analysis of Aluminum Alloy Component with Complex Shape by Cold Orbital Forming

Constitutive modelling of plastic deformation behaviour for AA7075-H18 alloy based on hot forming and in-die quenching (HFQ®) process

Numerical simulation of microstructure evolution of flange axle during hot forging

Construction of aluminum alloy constitutive model based on BP neural network and the study of non-isothermal hydroforming

Optimization of hot deformation parameters for multi-directional forging of Ti65 alloy based on the integration of processing maps and finite element method

Thermo-mechanical finite element analysis of the AA5086 alloy under warm forming conditions

Study on warm forming process of rigid-flexible composite drawing based on numerical simulation