Abstract:The study of liquid metal oxidation is of particular importance since some liquid metals are highly reactive with oxygen even under ultrahigh vacuum. The investigation of the oxidation behavior of liquid aluminum is strongly demanded due to its wide applications but relatively low melting point. However, it is still ambiguous about the products at the initial oxidation stage of liquid aluminum through the researches done in the past several decades. In order to investigate the initial oxidation products together with the oxidation mechanism of liquid aluminum, in-situ oxidation of nano aluminum powder was carried out at 720 degrees C in the environmental TEM (E-TEM). Prior to the oxidation, the nano aluminum powder was visualized and analyzed by E-TEM and DTA respectively. The results show that there is an amorphous Al2O3 film of 5-6 nm thick on the surface of the aluminum powder, which transforms to gamma-Al2O3 at a temperature range of 350-550 degrees C. By melting the nano powder to liquid followed by cooling under a total pressure of 10(-4) Pa in E-TEM, oxide-free solid aluminum is obtained. Re-melting of the solid aluminum at 720 degrees C yields oxide-free liquid aluminum. After oxidation of the oxide-free liquid aluminum under an oxygen partial pressure of 10(-2) Pa in E-TEM, alpha-Al2O3 nano wires appear on the liquid aluminum surface, demonstrating that the initial oxidation product of liquid aluminum is alpha-Al2O3. Moreover, the oxidation of liquid aluminum prepared from oxide-free bulk aluminum at 720 degrees C under an oxygen partial pressure of 10(-2) Pa was also studied. The XRD analysis of the products confirms that the oxide is constituted of single alpha-Al2O3. Additionally, this particular oxidation result of liquid aluminum is attributed to its liquid structure and vapor oxidation process.

Aluminum pigments encapsulated by sol-gel method using tetraethoxysilane and vinyltriethoxysilane as precursors

Preparation of sandwich structured polymer-encapsulated aluminum powder with bright color and excellent alkali resistance

Fabrication and characterization of corrosion resistant vinyl sulfone reactive dye-encapsulated colored aluminum pigment composites

Encapsulation of Organic Pigment Particles with Silica Via Sol-Gel Process

Corrosion resistance of anodically oxidized LY12 aluminum alloy after modification with cerium nitrate and silane

Adsorption Behavior of GTMS on AA2024-T3 Aluminum Alloy and the Application on Surface Pretreatment

Anti-corrosion Performance of LY12 Al Alloy Reinforced by Anodic Oxidization and Silanization

Observation on the Oxidation of Liquid Al by Environmental Transmission Electron Microscope

Titania-Alumina Composites

Synthesis and Characterization of Mixed Metal Oxide Pigments

Aluminum Coating Obtained through the Sol-Gel Method to Protect Metallic Surfaces against Corrosion

Preparation and characterization of anticorrosion Ormosil sol–gel coatings for aluminum alloy

Preparation technology and properties of a thin anodic oxide composite film on the surface of an aluminum alloy foil

Amorphous Silica: prepared by byproduct microsilica in the ferrosilicon production and applied in amorphous silica-TiO 2 composite with favorable pigment properties

Organic Pigment Particles Coated with Titania Via Sol-Gel Process

Synthesis and characterization of modified iron oxide hydrophobic corrosion-resistant pigment for aluminum alloy coating

Preparation of Monolithic Aluminium Titanate with Well-Defined Macropores Via a Sol–gel Process Accompanied by Phase Separation

Post-modification Using Aluminum Isopropoxide after Dye-Sensitization for Improved Performance and Stability of Quasi-Solid-state Solar Cells

Trialkoxysilane‐capped Acrylic Resin/alumina Hybrid Materials Prepared by in Situ Sol–gel Process

STUDIES OF SURFACE TREATMENT OF ALUMINUM ALLOYS BY BTSE SILANE AGENT

In-Situ Template Synthesis Titania Nanotube Array Films on Aluminum Plate