Abstract:Volatile Cu species were on-line generated by photochemical reduction in a formic acid medium utilizing a unique flow-through photochemical reactor. Digests of biological samples in 18% formic were introduced to the photochemical vapor generation (PVG) reactor under conditions wherein copper-containing species were initially retained on the reactor wall following a purge of the line with air and desorbed in the presence of a plug of 60% formic acid to yield volatile species which were transported to a gas–liquid separator and introduced to multi-collector inductively coupled plasma spectrometry (MC-ICPMS). Sensitivity of the proposed method could be further improved if a sample solution is repeatedly introduced using several cycles comprising loading and drying steps. However, the unstable volatile Cu species generated by PVG together with the early release of Cu during drying step resulted in a poor measurement precision of near 30% (n=4, RSD) and a non-linear correlation between the signal intensity and the Cu2+ concentration. Despite the above shortcomings, the accurate and precise determination of Cu concentrations in biological samples was achieved by applying isotope dilution (ID) calibration. A method detection limit of 8ngg−1 normalized to a nominal test mass of 0.25g of sample was obtained based on ID quantification. Method validation was demonstrated by analysis of three biological certified reference materials of TORT-3, SRM 1566b and DOLT-5 with satisfying results. Concentrations of 490.8±0.6, 71.88±0.06 and 34.95±0.04μgg−1 (1SD, n=4) with precisions of 0.12, 0.08 and 0.13% RSD for Cu were obtained in TORT-3, SRM 1566b and DOLT-5, respectively, in good agreement with certified values.

Thin Film Hydride Generation: Determination of Ultra-Trace Copper by Flow Injection in Situ Hydride Trapping Graphite Furnace AAS

Determination of Trace Amounts of Copper by Flow Injection Vapor Generation AAS

Copper Determination by Flow Injection On-Line Sorbent Preconcentration Coupled with Flame Atomic Absorption Spectrometry Using 1,10 Phenanthroline

Hydride Generation-Atomic Fluorescence Spectrometric Determination of Cadmium in Pure Copper

Determination of Trace Copper in Biological Samples by On-line Chemical Vapor Generation-Atomic Fluorescence Spectrometry

Determination of hydride-forming elements in high purity coppers by inductively coupled plasma atomic emission spectrometry

Determination of trace copper in water sample by flame atomic absorption spectrometry with cloud point extraction preconcentration

Flow Injection–electrochemical Hydride Generation Technique for Atomic Absorption Spectrometry. Invited Lecture

A New Method for the Determination of Trace-level Cu2+ Based on Flow-Injection on-line Preconcentration and Microwave Plasma torch-atomic Emission Spectrometry

Determination of Trace Amounts of Lead in Biological-Materials by Flow-Injection Hydride-Generation-Aas with Sensitivity Enhancements Using Nitroso-R-Salt

Uv Photochemical Vapor Generation and in Situ Preconcentration for Determination of Ultra-Trace Nickel by Flow Injection Graphite Furnace Atomic Absorption Spectrometry

Determination of copper in water and rice samples by flame atomic absorption spectrometry with flow-injection on-line adsorption preconcentration using a knotted reactor

A new continuous hydride generator for the determination of arsenic, Antimony and tin by hybride generation atomic absorption spectrometry

Flow injection on-line solid phase extraction for ultra-trace lead screening with hydride generation atomic fluorescence spectrometry.

Determination of Trace Copper with A Novel Kinetic Procedure/O-2-Gallocyanine Indicator Reaction

On-line UV Photochemical Generation of Volatile Copper Species and Its Analytical Application

A Simple and Sensitive Flow-Injection On-line Preconcentration Coupled with Hydride Generation Atomic Fluorescence Spectrometry for the Determination of Ultra-trace Lead in Water, Wine, and Rice

Electrothermal Atomic-Absorption Spectrometric Determination of Ultra-Trace Amounts of Tin by In-Situ Preconcentration in A Graphite Tube Using Flow-Injection Hydride Generation with Online Ion-Exchange Separation

Development of a miniature analytical system in a lab-on-valve for determination of trace copper by bead injection spectroscopy.

Determination of Selenium and Tellurium in Pure Cathode Copper by Hydride Generation-Atomic Fluorescence Spectrometry

Flow Injection Semi-online Preconcentration Graphite Furnace Atomic Absorption Spectrometry for Determination of Cadmium,Copper and Manganese