Abstract:Accurate prediction of welding residual stresses is often challenging due to the complexity of the welding process which includes moving heat source, temperature-dependent material properties etc. Over the past two decades or so, the numerical simulation technologies have been widely used in the welding process and a number of numerical models have been proposed to predict temperature field and residual stresses field induce by welding process. In the previous numerical simulations, the weldment was either in Free State or rigidly constrained. Such manipulations can not reflect the realistic constraint conditions of the weldment. In this simulation, clamps and backing board are all included in the model as elastic body and analytical rigid body, respectively. In the thermal analysis, the thermolysis of clamps and backing board can be equivalent to forced convection heat transfer, where the coefficients of forced convection heat transfer are temperature dependent; in the mechanical analysis, both the contact interaction between clamps and weldment and the contact interaction between backing board and weldment are considered, normal and tangent contact interaction properties are assumed as "HARD" contact and Coulomb friction, respectively. After welding process, residual compressive plastic strains existing in the weld zone and HAZ are the sources of residual stresses. Post welding cold rolling is an effective and convenient method to reduce residual compressive plastic strains induces by welding especially for thin-walled structure. In the previous researches, either welding process and cold rolling process were treated as two separate processes or only the residual stresses induced by welding process was considered as initial condition in the cold rolling process. In this simulation, welding residual stresses, plastic strains and deformations are all imported as the initial state of the cold rolling process to increase the accuracy of the numerical simulation. The import of plastic strains will affect the accuracy of the numerical simulation for the material which has obvious work harden effect.

NUMERICAL SIMULATION OF RESIDUAL STRESS IN COLD-FORMED SIGMA BEAMS

Experimental and numerical evaluations of the distribution and effect of roll-forming residual stress on CFS sigma beams

Evolution of Residual Stress Based on Curvature Coupling in Multi-Roll Levelling

Numerical Study on Residual Stresses and Plastic Strains in Cold-Formed High-Strength Steel Circular Hollow Sections

Residual Stresses in Roll-Formed Square Hollow Sections

High precision modeling of welding and post welding cold rolling continuous process in numerical simulation

Numerical simulation analysis of thermal stress fields during solidification of steel casting

Prediction of residual stress after cold rolling and coiling processes

Fem Analysis and Experimental Study on Residual Stress Induced by Form-Milling and Rolling of Rotor Steel 26Nicrmov145

Numerical Simulation of Residual Stress in 10ni5crmov Steel Weldments

Experimental Study on Transverse Residual Stresses of MS980 Cold-Rolled Shape With Square Section

An investigation on longitudinal residual strains distribution of thin-walled press-braked cold formed steel sections using 3D FEM technique

Numerical Simulations of Friction Stir Welding Process and Subsequent Post Weld Cold Rolling Process

Numerical Simulation and Design of Cold-Formed Steel Oval Hollow Section Compression Members

Experiments and numerical modelling of cold-formed steel beams under bending and torsion

Residual stress model of welded steel L-shaped and T- shaped sections

Residual Stress Measurements and Modeling of Built-Up Box-T Sections

Numerical Prediction of Residual Stresses Distribution in Thin-Walled Press-Braked Stainless Steel Sections

The Simulation of Roll Forming with Multiple Passes

Careful finite element simulations of cold rolling with accurate through-thickness resolution and prediction of residual stress

Research on material flow stress models in common use