Abstract:Ultrasonic impact treatment of stainless steel AISI 321 was carried out at room temperature (in the argon environment – argon-UIT) and at cryogenic temperature (in liquid nitrogen – cryo-UIT) in the constrained conditions with application of the same mechanical energy to the treated specimens. The time dependencies of the surface hardness HV after the cryo-UIT and argon-UIT processes were of sigmoidal and parabolic shapes, respectively. The microstructural evolution of the surface layers of the deformed specimens was studied by X-ray diffraction (XRD), optical microscopy (OM), transmission electron microscopy (TEM) and selective area electron diffraction (SAED) analyses. The volume fractions of the deformation-induced α′ (V α′) and ε (V ε) martensites were estimated using XRD approach and by magnetic and density measurements. Compared to the room temperature UIT in the argon environment (argon-UIT), the liquid nitrogen UIT generates a higher density of the deformation twins and stacking faults. In addition, a higher V α′ (~53%) and V ε (~3.5%) were observed after cryo-UIT in deeper surface layers (~200μm). The argon-UIT process leads to the formation of either rectangular twin blocks or dislocation cells, which size ranged 200–500nm. Conversely, after cryo-UIT (ē ≈0.95), a nanoscale grain structure of heterogeneous nature (α′ and γ phases) was formed in the outmost surface layer simultaneously with the areas filled with networks of deformation twins and stacking faults. The minimum grain size of α′-martensite D α′ and austenite D γ was respectively 25 and 45nm, and twin thickness/spacing was of 60–120nm. Both types of the microstructure contribute to the material strength and result in higher hardness of the cryo-UIT processed specimens (~5–5.66GPa) compared to that of the argon-UIT processed ones (~4.3GPa). With the increase in Zener-Hollomon parameter lnZ, the grain/twin/spacing size is decreased while the V α′ and surface microhardness HV are increased.

A new method improving intergranular corrosion resistance of AISI 304 stainless steel: deep cryogenic treatment

Enhancing Ductility of Martensitic Steels Through Cryogenic Treatment

The strengthening role of post-welded cryogenic treatment on the performance and microstructure of 304 austenitic stainless steel weldments

Effect of Deep Cryogenic Treatment on Corrosion Behavior of AISI H13 Die Steel

Martensitic transformation in rolled 301 stainless steel induced by cryogenic treatment

The effect of deep cryogenic treatments on the mechanical properties of an AISI H13 steel

Elucidating the role of secondary cryogenic treatment on mechanical properties of a martensitic ultra-high strength stainless steel

Effects of deep cryogenic treatment on microstructural evolution and alloy phases precipitation of a new low carbon martensitic stainless bearing steel during aging

Effects of traditional heat treatment and a novel deep cryogenic treatment on microstructure and mechanical properties of low-carbon high-alloy martensitic bearing steel

The Grain Size and Special Boundary Dependence of Corrosion Resistance in 304 Austenitic Stainless Steels

Study on the role of cryogenic treatment on corrosion and wear behaviors of high manganese austenitic steel

Influence of Cryogenic Treatment on the Corrosion Properties of 42CrMo Low Alloy Steel

Experimental Investigation on the Effect of Deep Cryogenic Treatment on 100Cr6 Bearing Steel

Effect of Cr-rich carbide precipitates on austenite stability and consequent corrosion behavior of ultrafine-grained 304 stainless steel produced by cryogenic rolling and annealing treatment

Strain-Annealing Based Grain Boundary Engineering to Evaluate its Sole Implication on Intergranular Corrosion in Extra-Low Carbon Type 304L Austenitic Stainless Steel

Effect mechanism of cryogenic treatment on ferroalloy and nonferrous alloy and their weldments: A review

The Strengthening Role of Cryogenic Treatment in the Mechanical Properties and Abrasive Wear of Low Alloy Wear-Resistant Steel

Effect of multiple deep cryo-treating and tempering on microstructure and property evolution of high carbon bearing steel

Influence of microstructural features and deformation-induced martensite on hardening of stainless steel by cryogenic ultrasonic impact treatment

Effect of deep cryogenic treatment on the mechanical properties of tool steels

Effects of cryogenic treatment on mechanical properties and crystal orientation of 0.25C-0.80Si-1.6Mn steel with extraordinary strength-toughness