Abstract:Nano-sized calcium carbonate, as a multifunctional material, is widely used in various industrial fields. The morphology, particle size, surface property of CaCO3 particles have great impact on the application effect. This study presents an energy-saving and efficient approach to controllably prepare CaCO3 nanoparticles and conduct surface modification simultaneously. Ca(OH)(2)/CO2 carbonation method was adopted to prepare CaCO3 nanoparticles using a membrane dispersion microreactor in the presence of calcium stearate (CaSt(2)) surfactant. The effects of gas and liquid flow rates, temperature and the dosage of surfactant were systematically investigated. The effect of surface modification was evaluated by contact angle and active ratio. The as-prepared hydrophobic CaCO3 nanoparticles were of good dispersity, with an average particle size of 34 nm, a specific surface area of above 30 m(2)/g and a contact angle of 107.8 degrees. In this work, the effect of surfactant on the carbonation reaction was greatly diminished by adding CaSt(2) surfactant to a portion of Ca(OH)(2) slurry. Additionally, the modification process was carried out without organic solvents and high temperature. As compared to post-modification method, the in-situ modification process is of significant practical importance because of high production efficiency, excellent process stability, and high product quality. (C) 2019 Published by Elsevier B.V.

In situ Preparation and Property of Superfine High-dispersal Calcium Carbonat

Mechanism and surface characteristics of polyacrylic acid-coated ultra-fine CaCO3

Effect of Oleic Acid-modified Nano-CaCO3 on the Crystallization Behavior and Mechanical Properties of Polypropylene

The Study on Mechanism, Interfacial Properties of PS-b-PAA Copolymer Coated Calcium Carbonate Particulate

The Mechanical and NIR Studies on Ultrafine Calcium Carbonate Treated by Four Surface Modifiers.

Preparation of Poly(methyl Methacrylate)/ultrafine CaCO3 Composite Particles by In-Situ Dispersion Polymerization

Preparation of PVC/CaCO3 Nano-Filler Composite Special for Building Material by In-Situ Polymerization

Mechanical and Thermal Properties of Polypropylene (PP) Composites Filled with CaCO3 and Shell Waste Derived Bio-Fillers

In Situ Preparation of Hydrophobic CaCO3 Nanoparticles in a Gas–liquid Microdispersion Process

Preparation and characterization of ultra-hydrophobic calcium carbonate nanoparticles

Preparation and In-Situ Surface Modification of CaCO3 Nanoparticles with Calcium Stearate in a Microreaction System

Surface Modification of CaCO3 by Ultrasound-Assisted Titanate and Silane Coupling Agents

Mechano-activated Surface Modification of Calcium Carbonate in Wet Stirred Mill and Its Properties

Study on Surface Modification of Nano-Calcium Carbonate in Ethanol and Its In-situ Composite

Preparation and Characterization of In-Situ Nano Calcium Carbonate/Polystyrene Composite

Preparation of ultrafine calcium carbonate particles with micropore dispersion method

The Preparation of Caco3 Nanoparticles by Adding Paana and Its Product Characterization

The Application of Modified Superfine Ground Calcium Carbonate in Rigid PVC

Preparation of composite ground calcium carbonate in Ca(OH) 2-H 2O-CO 2 system and characterization

Surface modification of calcium carbonate: A review of theories, methods and applications

Preparation and property analysis of polyacrylate dispersant for calcium carbonate