Abstract:In this paper, the synthesis of poly(3,4-ethylenedioxythiophene) (PEDOT) by cyclic voltammetry (CV) electrochemical deposition and its application in the counter electrode of solid-state dye-sensitized solar cells were studied. The influence of cycle times (10 similar to 50 times) on the morphology, thickness and optical properties of PEDOT films were explored by Fourier transform infrared spectroscopy (FTIR), atomic force microscope (AFM), scanning electron microscope (SEM) and ultraviolet-visible spectroscopy (UV-Vis). The photoelectrochemical properties of solid-state dye-sensitized solar cells based on PEDOT transparent counter electrode were characterized by J-V, electrochemical impedance spectroscopy (EIS), intensity modulated photocurrent spectrum/photovoltage spectrum (IMPSNS) and Tafel analysis. The results showed that an un-uniform film with the thickness of 0.5 mu m and light transmittance of 80% was formed when CV cycle times was 10, where the PEDOT film was not completely covered on the substrate. When the CV cycles reached 30 similar to 40, a uniform and dense transparent film was obtained and the highest photo-electric conversion efficiency of the corresponding solid-state dye-sensitized solar cells reached 5.34%. This is because uniform and dense surface, good optical properties and high photo- electric catalysis properties (J(0) =2.51 X 10(-3) A.cm(-2)) for I-3 in the electrolyte, made the device obtain larger diffusion coefficient (D-n=28.80 mu m(2).ms(-1)) and carrier diffusion length (L = 21 .41 mu m), which were favorable for charge transfer. When the number of CV cycles was further increased to 50 times, showing greater roughness, the PEDOT fihn was no longer growing uniformly. The PEDOT film deposited on the FTO surface underwent some dissolution and desorption, the PEDOT film became uneven, and the catalytic activity of PEDOT electrode to I-3(-) in electrolyte was reduced. The device with PEDOT transparent counter electrode fihn deposited by cyclic voltammetry could also achieve double-side illumination with good catalytic activity to the electrolyte. Under the condition of double-side illumination, the photoelectric performance of the device using electrodeposited PEDOT as transparent counter electrode was improved by about 20%. The improvement of the photoelectric performance of the device is mainly due to the increase in the absorption of photons by the double-sided illumination.

Electrochemically Prepared Poly(3,4-ethylenedioxy- thiophene)/Polypyrrole Films with Hollow Micro-/Nanohorn Arrays as High-Efficiency Counter Electrodes for Dye-Sensitized Solar Cells

Transparent MoS<sub>2</sub>/PEDOT Composite Counter Electrodes for Bifacial Dye-Sensitized Solar Cells

Electro-polymerization of Polypyrrole/multi-Wall Carbon Nanotube Counter Electrodes for Use in Platinum-Free Dye-Sensitized Solar Cells

Honeycomb-like Poly(3,4-Ethylenedioxythiophene) As an Effective and Transparent Counter Electrode in Bifacial Dye-Sensitized Solar Cells

Nanoporous TiO2/SnO2/Poly(3,4-ethylene-dioxythiophene): Polystyrenesulfonate Composites As Efficient Counter Electrode for Dye-Sensitized Solar Cells

Facile Synthesis of Hierarchical Nanostructured Polypyrrole and Its Application in the Counter Electrode of Dye-Sensitized Solar Cells

Chemically synthesized poly(3,4-ethylenedioxythiophene) conducting polymer as a robust electrocatalyst for highly efficient dye-sensitized solar cells

Improvement on the Catalytic Activity of the Flexible PEDOT Counter Electrode in Dye-Sensitized Solar Cells

A Transparent Honeycomb-Like Poly(3,4-Ethylenedioxythiophene)/multi-wall Carbon Nanotube Counter Electrode for Bifacial Dye-Sensitized Solar Cells

Honeycomb-like Polypyrrole/multi-Wall Carbon Nanotube Films As an Effective Counter Electrode in Bifacial Dye-Sensitized Solar Cells

Electrochemical Synthesis of PEDOT and Its Application in Solid-State Dye-sensitized Solar Cells

High-performance plastic platinized counter electrode via photoplatinization technique for flexible dye-sensitized solar cells.

Facile construction of a polypyrrole-cobalt sulfide counter electrode for low-cost dye-sensitized solar cells

Multifunctional conjugated molecules combined with electrospun CuCoP/carbon nanofibers as a modifier of Pt counter electrode for dye-sensitized solar cells

Ultrafine Transition Metal Phosphide Nanoparticles Semiembedded in Nitrogen-Doped Carbon Nanotubes for Efficient Counter Electrode Materials in Dye-Sensitized Solar Cells

CuInS<sub>2</sub> Nanocrystals/PEDOT:PSS Composite Counter Electrode for Dye-Sensitized Solar Cells

Bifacial Dye-Sensitized Solar Cells Using Highly Transparent PEDOT:PSS Films As Counter Electrodes

Electron Migration Optimization Through Nanostructural Control of Hierarchical Fe3O4 Based Counter Electrodes for High-Performance Dye-Sensitized Solar Cells

Novel platinum-free counter-electrode with PEDOT:PSS-treated graphite/activated carbon for efficient dye-sensitized solar cells

FTO-free and low-Pt-loading counter electrodes for dye-sensitized solar cells based on chemical bath deposited microstructured nickel layer

Enhanced Photovoltaic Performance of Poly(3,4-Ethylenedioxythiophene)Poly(N-Alkylcarbazole) Copolymer-Based Counter Electrode in Dye-Sensitized Solar Cells