Abstract:In this paper, the synthesis of poly(3,4-ethylenedioxythiophene) (PEDOT) by cyclic voltammetry (CV) electrochemical deposition and its application in the counter electrode of solid-state dye-sensitized solar cells were studied. The influence of cycle times (10 similar to 50 times) on the morphology, thickness and optical properties of PEDOT films were explored by Fourier transform infrared spectroscopy (FTIR), atomic force microscope (AFM), scanning electron microscope (SEM) and ultraviolet-visible spectroscopy (UV-Vis). The photoelectrochemical properties of solid-state dye-sensitized solar cells based on PEDOT transparent counter electrode were characterized by J-V, electrochemical impedance spectroscopy (EIS), intensity modulated photocurrent spectrum/photovoltage spectrum (IMPSNS) and Tafel analysis. The results showed that an un-uniform film with the thickness of 0.5 mu m and light transmittance of 80% was formed when CV cycle times was 10, where the PEDOT film was not completely covered on the substrate. When the CV cycles reached 30 similar to 40, a uniform and dense transparent film was obtained and the highest photo-electric conversion efficiency of the corresponding solid-state dye-sensitized solar cells reached 5.34%. This is because uniform and dense surface, good optical properties and high photo- electric catalysis properties (J(0) =2.51 X 10(-3) A.cm(-2)) for I-3 in the electrolyte, made the device obtain larger diffusion coefficient (D-n=28.80 mu m(2).ms(-1)) and carrier diffusion length (L = 21 .41 mu m), which were favorable for charge transfer. When the number of CV cycles was further increased to 50 times, showing greater roughness, the PEDOT fihn was no longer growing uniformly. The PEDOT film deposited on the FTO surface underwent some dissolution and desorption, the PEDOT film became uneven, and the catalytic activity of PEDOT electrode to I-3(-) in electrolyte was reduced. The device with PEDOT transparent counter electrode fihn deposited by cyclic voltammetry could also achieve double-side illumination with good catalytic activity to the electrolyte. Under the condition of double-side illumination, the photoelectric performance of the device using electrodeposited PEDOT as transparent counter electrode was improved by about 20%. The improvement of the photoelectric performance of the device is mainly due to the increase in the absorption of photons by the double-sided illumination.

Electrochemical Synthesis of PEDOT and Its Application in Solid-State Dye-sensitized Solar Cells

Effect of Electropolymerization Time on the Performance of Poly(3,4-Ethylenedioxythiophene) Counter Electrode for Dye-Sensitized Solar Cells

Electropolymerization of a poly(3,4-ethylenedioxythiophene) and functionalized, multi-walled, carbon nanotubes counter electrode for dye-sensitized solar cells and characterization of its performance

Chemically synthesized poly(3,4-ethylenedioxythiophene) conducting polymer as a robust electrocatalyst for highly efficient dye-sensitized solar cells

Facile Synthesis of Poly(3,4-Ethylenedioxythiophene) Film Via Solid-State Polymerization As High-Performance Pt-free Counter Electrodes for Plastic Dye-Sensitized Solar Cells.

Solid-state Synthesis of a Conducting Polythiophene As Efficient Pt-free Thin Film Counter Electrode for Dye-Sensitized Solar Cells

Improvement on the Catalytic Activity of the Flexible PEDOT Counter Electrode in Dye-Sensitized Solar Cells

A dye-sensitized solar cell based on natural photosensitizers and a PEDOT:PSS/TiO2 film as a counter electrode

Electropolymerized Poly(3,4-Ethylenedioxythiophene):Poly(styrene Sulfonate) (PEDOT:PSS) Film on ITO Glass and Its Application in Photovoltaic Device

Transparent MoS<sub>2</sub>/PEDOT Composite Counter Electrodes for Bifacial Dye-Sensitized Solar Cells

Enhanced Catalytic Property of Transparent PEDOT Counter Electrodes for Bifacial Dye Sensitized Solar Cells

In situ Polymerization of PEDOT: pi-Conjugated Polyelectrolyte and Application as Hole Transport Layer in Polymer Solar Cells

Electrodeposited Transparent PEDOT for Inverted Perovskite Solar Cells: Improved Charge Transport and Catalytic Performances

Ultrafast-laser-treated poly(3,4-ethylenedioxythiophene): poly(styrenesulfonate) electrodes with enhanced conductivity and transparency for semitransparent perovskite solar cells

Electrochemically Prepared Poly(3,4-ethylenedioxy- thiophene)/Polypyrrole Films with Hollow Micro-/Nanohorn Arrays as High-Efficiency Counter Electrodes for Dye-Sensitized Solar Cells

Electropolymerization Polyoxometalate (Pom)-Doped Pedot Film Electrodes with Mastoid Microstructure and Its Application in Dye-Sensitized Solar Cells (Dsscs)

Nanotube and poly(3,4-ethylenedioxythiophene):polystyrene sulfonate (PEDOT:PSS) composite film for the electrode applications in organic thin-film transistor and dye-sensitized solar cells

The Impact of Metal Ion Doping on the Performance of Flexible Poly(3,4-ethylenedioxythiophene) (PEDOT) Cathode in Dye-Sensitized Solar Cells

Conducting Polymer and Titanium Carbide-Based Nanocomposites As Efficient Counter Electrodes for Dye-Sensitized Solar Cells

Nanoporous TiO2/SnO2/Poly(3,4-ethylene-dioxythiophene): Polystyrenesulfonate Composites As Efficient Counter Electrode for Dye-Sensitized Solar Cells

Photoelectrochemical Polymerization of EDOT for Solid State Dye Sensitized Solar Cells: Role of Dye and Solvent