Abstract:In this paper, the synthesis of poly(3,4-ethylenedioxythiophene) (PEDOT) by cyclic voltammetry (CV) electrochemical deposition and its application in the counter electrode of solid-state dye-sensitized solar cells were studied. The influence of cycle times (10 similar to 50 times) on the morphology, thickness and optical properties of PEDOT films were explored by Fourier transform infrared spectroscopy (FTIR), atomic force microscope (AFM), scanning electron microscope (SEM) and ultraviolet-visible spectroscopy (UV-Vis). The photoelectrochemical properties of solid-state dye-sensitized solar cells based on PEDOT transparent counter electrode were characterized by J-V, electrochemical impedance spectroscopy (EIS), intensity modulated photocurrent spectrum/photovoltage spectrum (IMPSNS) and Tafel analysis. The results showed that an un-uniform film with the thickness of 0.5 mu m and light transmittance of 80% was formed when CV cycle times was 10, where the PEDOT film was not completely covered on the substrate. When the CV cycles reached 30 similar to 40, a uniform and dense transparent film was obtained and the highest photo-electric conversion efficiency of the corresponding solid-state dye-sensitized solar cells reached 5.34%. This is because uniform and dense surface, good optical properties and high photo- electric catalysis properties (J(0) =2.51 X 10(-3) A.cm(-2)) for I-3 in the electrolyte, made the device obtain larger diffusion coefficient (D-n=28.80 mu m(2).ms(-1)) and carrier diffusion length (L = 21 .41 mu m), which were favorable for charge transfer. When the number of CV cycles was further increased to 50 times, showing greater roughness, the PEDOT fihn was no longer growing uniformly. The PEDOT film deposited on the FTO surface underwent some dissolution and desorption, the PEDOT film became uneven, and the catalytic activity of PEDOT electrode to I-3(-) in electrolyte was reduced. The device with PEDOT transparent counter electrode fihn deposited by cyclic voltammetry could also achieve double-side illumination with good catalytic activity to the electrolyte. Under the condition of double-side illumination, the photoelectric performance of the device using electrodeposited PEDOT as transparent counter electrode was improved by about 20%. The improvement of the photoelectric performance of the device is mainly due to the increase in the absorption of photons by the double-sided illumination.

Improvement on the Catalytic Activity of the Flexible PEDOT Counter Electrode in Dye-Sensitized Solar Cells

Transparent MoS<sub>2</sub>/PEDOT Composite Counter Electrodes for Bifacial Dye-Sensitized Solar Cells

Electrochemical Synthesis of PEDOT and Its Application in Solid-State Dye-sensitized Solar Cells

The Impact of Metal Ion Doping on the Performance of Flexible Poly(3,4-ethylenedioxythiophene) (PEDOT) Cathode in Dye-Sensitized Solar Cells

Chemically synthesized poly(3,4-ethylenedioxythiophene) conducting polymer as a robust electrocatalyst for highly efficient dye-sensitized solar cells

Nanoporous TiO2/SnO2/Poly(3,4-ethylene-dioxythiophene): Polystyrenesulfonate Composites As Efficient Counter Electrode for Dye-Sensitized Solar Cells

CuInS<sub>2</sub> Nanocrystals/PEDOT:PSS Composite Counter Electrode for Dye-Sensitized Solar Cells

High-performance plastic platinized counter electrode via photoplatinization technique for flexible dye-sensitized solar cells.

Electrochemical and power conversion performance of different counter electrode materials for flexible dye-sensitized solar cells

The electrocatalytic performance of Fe 3 C@C composites as efficient Pt-free counter electrode for triiodide reduction in dye-sensitized solar cells

Improvement in the photoelectric conversion efficiency for the flexible fibrous dye-sensitized solar cells

Flexible, metal-free composite counter electrodes for efficient fiber-shaped dye-sensitized solar cells

Facile Construction Of High-Electrocatalytic Bilayer Counter Electrode For Efficient Dye-Sensitized Solar Cells

A dye-sensitized solar cell based on natural photosensitizers and a PEDOT:PSS/TiO2 film as a counter electrode

The Maximum Limiting Performance Improved Counter Electrode Based on a Porous Fluorine Doped Tin Oxide Conductive Framework for Dye-Sensitized Solar Cells

Electron Migration Optimization Through Nanostructural Control of Hierarchical Fe3O4 Based Counter Electrodes for High-Performance Dye-Sensitized Solar Cells

Construction of magnetic Fe2P2O7/Ni2P@Mxene composite counter electrode for efficient dye-sensitized solar cells

Flexible counter electrodes with a composite carbon/metal nanowire/polymer structure for use in dye-sensitized solar cells

Enhanced Photovoltaic Performance of Poly(3,4-Ethylenedioxythiophene)Poly(N-Alkylcarbazole) Copolymer-Based Counter Electrode in Dye-Sensitized Solar Cells

High-Efficiency Dye-Sensitized Solar Cells Based on Kesterite Cu 2 ZnSnSe 4 Inlaid on a Flexible Carbon Fabric Composite Counter Electrode

Multifunctional conjugated molecules combined with electrospun CuCoP/carbon nanofibers as a modifier of Pt counter electrode for dye-sensitized solar cells