Abstract:Highly transparent poly(3,4-ethylenedioxythiophene):polystyrenesulfonate (PEDOT: PSS) films prepared by a facile spin-coating process were developed as counter electrodes for the configuration of bifacial dye-sensitized solar cells (DSSCs) with capability of utilizing the light from both sides. The used PEDOT:PSS films involved a pristine PEDOT:PSS film and ten modified PEDOT:PSS ones. The additives for preparing the modified PEDOT:PSS films were involved in iodine (IOD), dimethyl sulfoxide (DMSO), ethanol, acetone, glycerol, sorbitol and poly(ethylene glycol) (PEG) with different molecular weights (200, 400, 800 and 20,000). The UV-Vis spectra confirm that all the PEDOT:PSS films on fluorine-doped tin oxide substrates have excellent transparency with transmittance ranging from 78% to 83.5% at 550 nm. The bifacial DSSC using the pristine PEDOT:PSS film exhibits the efficiencies of 4.71% and 2.38% corresponding to the illuminations from the front and the rear sides, respectively. When the additives of IOD, DMSO and PEG200 are applied to modify the pristine PEDOT:PSS film, the corresponding device shows a significantly improved efficiency of 5.19%, 5.11% and 5.29% under the front illumination and an almost unchanged efficiency under the rear illumination, respectively. The strengthened efficiency is mainly attributed to the improved catalytic activity of the modified PEDOT:PSS films induced by the coarser surface and the lower sheet resistance. Moreover, the bifacial DSSCs with the three modified PEDOT:PSS films not only have a comparable front-illuminated efficiency to the conventional Pt based DSSCs but also possess a higher rear-illuminated efficiency than the latter cells. (C) 2015 Elsevier Ltd. All rights reserved.

Honeycomb-like Polypyrrole/multi-Wall Carbon Nanotube Films As an Effective Counter Electrode in Bifacial Dye-Sensitized Solar Cells

A Transparent Honeycomb-Like Poly(3,4-Ethylenedioxythiophene)/multi-wall Carbon Nanotube Counter Electrode for Bifacial Dye-Sensitized Solar Cells

Honeycomb-like Poly(3,4-Ethylenedioxythiophene) As an Effective and Transparent Counter Electrode in Bifacial Dye-Sensitized Solar Cells

Transparent MoS<sub>2</sub>/PEDOT Composite Counter Electrodes for Bifacial Dye-Sensitized Solar Cells

Electro-polymerization of Polypyrrole/multi-Wall Carbon Nanotube Counter Electrodes for Use in Platinum-Free Dye-Sensitized Solar Cells

Tellurium-Doped, Mesoporous Carbon Nanomaterials as Transparent Metal-Free Counter Electrodes for High-Performance Bifacial Dye-Sensitized Solar Cells

Bifacial Dye-Sensitized Solar Cells Using Highly Transparent PEDOT:PSS Films As Counter Electrodes

Effective iron-molybdenum-disulfide counter electrodes for use in platinum-free dye-sensitized solar cells

Fuel-assisted polyol reduction for highly transparent and efficient Pt counter electrodes in bifacial dye-sensitized solar cells

Conducting polymer/carbon nanotube composite as counter electrode of dye-sensitized solar cells

Ni and P co-doped WS 2 nanosheets decorated on MWCNTs as an efficient counter electrode for dye-sensitized solar cells

Facile construction of a polypyrrole-cobalt sulfide counter electrode for low-cost dye-sensitized solar cells

Multifunctional conjugated molecules combined with electrospun CuCoP/carbon nanofibers as a modifier of Pt counter electrode for dye-sensitized solar cells

NiCo2O4/carbon nanofibers composite as an efficient counter electrode for dye-sensitized solar cells

Three-Dimensional Vertically Aligned Hybrid Nanoarchitecture of Two-Dimensional Molybdenum Disulfide Nanosheets Anchored on Directly Grown One-Dimensional Carbon Nanotubes for Use As A Counter Electrode in Dye-Sensitized Solar Cells

Carbon nanotube aerogel-CoS2 hybrid catalytic counter electrodes for enhanced photovoltaic performance dye-sensitized solar cells

Fabrication of a free-standing Ti3C2T x -PTh counter electrode via interfacial polymerization for dye-sensitized solar cells

Serrated, Flexible and Ultrathin Polyaniline Nanoribbons: an Efficient Counter Electrode for the Dye-Sensitized Solar Cell

A hierarchical strategy for fabricating synergistic 3D network bio-based porous carbon and 0D niobium-based bimetallic oxides as counter electrodes for I- and Cu-mediated dye-sensitized solar cells with N719 and Y123 dyes

Ultrafine Transition Metal Phosphide Nanoparticles Semiembedded in Nitrogen-Doped Carbon Nanotubes for Efficient Counter Electrode Materials in Dye-Sensitized Solar Cells

High performance platinum nanofibers with interconnecting structure using in dye-sensitized solar cells