Abstract:With the development of large span and heavy load modern engineering, concrete-filled steel tubular truss and laced column structures appear constantly. The joints of these structures are mostly circular Concrete-Filled Steel Tubular (CFST) joints. In order to solve the problem of lacking of the research on the mechanical properties of CFST joints, three CFST T-joints and one Circular Hollow Section (CHS) T-joint which was used for comparing were tested under reversed cyclic axial loading, and three CFST T-joints and one CHS T-joint were tested under reversed cyclic in-plane bending loading. The failure modes and the ultimate load carrying capacities of CFST T-joints were concluded and the load-displacement hysteretic curves were also studied. The test results showed that the failure modes of CFST joints and CHS joints with the same geometry were completely different, the ultimate load carrying capacities of CFST joints were much higher than that of CHS joints, which shows that adopting a concrete-filled chord member is the most effective way to improve the strength of the unstiffened tubular joints when subjected to axial loading and in-plane bending, the energy dissipation mechanisms of CFST joints and CHS joints were completely different, but both CFST joints and CHS joints had excellent seismic performances. The energy analysis of CFST joints under differing loading conditions indicated that there was a significant distinction in terms of the energy dissipation mechanism. The axially loaded specimens dissipated energy mainly by plastic deformation of the brace, while the in-plane bending loaded specimens dissipated energy mainly by punching shear of the chord wall at the intersection area. This research can not only provide scientific basis for the design of CFST joints, but also effectively promote the application of CFST truss and laced column, and can promote the improvement and development of the design theory of concrete-filled steel structures.

Numerical Performance of Blind-Bolted Demountable Square CFST K-joints

Numerical Investigation of Demountable CFST K-joints Using Blind Bolts

Experimental study on demountable CFST K-joints designed with blind bolts

Experimental and Numerical Study on the Performance of New Prefabricated Connections for Free-Form Grid Structures

EXPERIMENTAL RESEARCH AND FINITE ELEMENT ANALYSIS ON A WELDED JOINT WITH TUBES INTERSECTED AT TWO DIFFERENT POINTS

Cyclic behaviour of novel blind bolted joints with different stiffening elements

Static And Seismic Experiments And Analysis Models Of Blind Bolted End Plate Joints To Cft Columns

Seismic Behavior of a Novel Blind Bolted Flush End-Plate Connection to Strengthened Concrete-Filled Steel Tube Columns

Study Of Mechanical Performance Of Concrete-Filled Steel Tubular Joints

Mechanical Behaviour and Design of Concrete-Filled K and KK CHS Connections

Seismic experiment on blind-bolted joint in concrete-filled double steel tubular structure

Feasibility and Performance of Novel Tapered Iron Bolt Shear Connectors in Demountable Composite Beams

Seismic Performance Analysis of the Internal Joint in the New Demountable Fabricated Concrete Frame with Prestressed Mortise–Tenon Connections

Structural behaviour of blind bolted connection to concrete-filled steel tubular columns

Load Introduction and Transfer Mechanism of K-type CFST Circular Section Connections

Seismic behavior of composite bolted T-shaped exterior joints in modular steel construction

Experimental Study on Blind Bolted Connections to Concrete-Filled Stainless Steel Columns

Behaviour Of Flush End Plate Connections To Concrete-Filled Tubular Columns With Blind Bolts

Experiments on stainless steel hybrid K-joints with square braces and circular chord

Behaviour of flush end plate joints to concrete-filled steel tubular columns

Bolted End Plate Connections for Steel Reinforced Concrete Composite Structures