Abstract:With the development of large span and heavy load modern engineering, concrete-filled steel tubular truss and laced column structures appear constantly. The joints of these structures are mostly circular Concrete-Filled Steel Tubular (CFST) joints. In order to solve the problem of lacking of the research on the mechanical properties of CFST joints, three CFST T-joints and one Circular Hollow Section (CHS) T-joint which was used for comparing were tested under reversed cyclic axial loading, and three CFST T-joints and one CHS T-joint were tested under reversed cyclic in-plane bending loading. The failure modes and the ultimate load carrying capacities of CFST T-joints were concluded and the load-displacement hysteretic curves were also studied. The test results showed that the failure modes of CFST joints and CHS joints with the same geometry were completely different, the ultimate load carrying capacities of CFST joints were much higher than that of CHS joints, which shows that adopting a concrete-filled chord member is the most effective way to improve the strength of the unstiffened tubular joints when subjected to axial loading and in-plane bending, the energy dissipation mechanisms of CFST joints and CHS joints were completely different, but both CFST joints and CHS joints had excellent seismic performances. The energy analysis of CFST joints under differing loading conditions indicated that there was a significant distinction in terms of the energy dissipation mechanism. The axially loaded specimens dissipated energy mainly by plastic deformation of the brace, while the in-plane bending loaded specimens dissipated energy mainly by punching shear of the chord wall at the intersection area. This research can not only provide scientific basis for the design of CFST joints, but also effectively promote the application of CFST truss and laced column, and can promote the improvement and development of the design theory of concrete-filled steel structures.

Seismic experiment on blind-bolted joint in concrete-filled double steel tubular structure

EXPERIMENTAL STUDY ON THE SEISMIC BEHAVIOR OF CFST RECTANGULAR COLUMN TO H-SECTION STEEL BEAM CONNECTIONS WITH EXTERNAL STIFFENERS

Seismic Behavior of an Improved Drilled Flange Connection for I-beam to CFST Column

Experimental Study on Reduced I-beam to CFRST Column Joints under Cyclic Loading

Experimental Study On Seismic Behavior Of Innovative Multi-Cellular Cft-Walls With Tie-Bolts

Seismic Behavior of Exterior Connections with Steel Beams Bolted to Cft Columns

Experimental Research on Seismic Behavior of Reinforced Concrete Column-to-Steel Beam Joints with Bolted End-plate

Study Of Mechanical Performance Of Concrete-Filled Steel Tubular Joints

Seismic Behaviour of Semi-Rigid Joints to Concrete Filled Steel Tubular Columns

Experimental and Analytical Behavior of Square CFDST Column Blind Bolted to Steel Beam Connections

Seismic Behavior of a Novel Blind Bolted Flush End-Plate Connection to Strengthened Concrete-Filled Steel Tube Columns

Structural behaviour of blind bolted connection to concrete-filled steel tubular columns

Experimental study on the seismic behaviour of the connection between concrete-filled twin steel tubes column and steel beam

Experimental Study on Blind Bolted Connections to Concrete-Filled Stainless Steel Columns

Experimental and Numerical Investigation of Concrete-Filled Double-Skin Steel Tubular Column for Steel Beam Joints

Fire and post-fire performance of blind-bolted concrete-filled steel tubular joints with restrained steel beams: Experiment and simulation

Cyclic behaviour of novel blind bolted joints with different stiffening elements

Behaviour of flush end plate joints to concrete-filled steel tubular columns

Static And Seismic Experiments And Analysis Models Of Blind Bolted End Plate Joints To Cft Columns

Study of energy dissipation mechanism of concrete-filled steel tubular T-joints

Seismic Performance of Stiffened Concrete-Filled Double Skin Steel Tubes