Abstract:The use of cold-formed steel tubes in the concrete-filled steel tubular (CFST) columns makes the design of the moment connections between beams and CFST columns much more challenging. This is because setting the internal diaphragms in the CFST column to transfer the bending moment of the beam end becomes impossible, and thus new joints are needed. A novel joint was proposed in a previous study by the authors, where two end plates were used for the force transmission between CFST columns and beam flanges. Moreover, to satisfy the “weak member strong joint” requirement, the I-beams were reduced by drilling a series of circular holes in their flanges. However, most of the tested specimens failed by the unexpected rupture of the complete joint penetration (CJP) groove welds between the beam flanges and end plates. In this paper, three specimens are redesigned and tested, where modifications are made to improve their behaviors under the seismic load. In this test, the local buckling of beam flanges at the drilled sections was observed in all specimens, and two specimens failed due to the fracture at the drilled sections, while CJP weld fracture and significant bending of beam flanges both occurred at the failure of the rest specimen. The hysteresis curves of all specimens are fusiform, indicating their good energy dissipations (the maximum equivalent viscous damping coefficients between 0.35 and 0.40). The failure rotation angles are about 2.44–3.01, and the ductility coefficients are between 2.26 and 2.66. According to EC3, all specimens can be classified into the rigid and full-strength joints. Subsequently, the parametric analyses using the validated finite element model are carried out, where the effects of main parameters are investigated on the seismic behavior of the presented joint. This study brings insights into the moment connections between the steel beam and CFST column with the outer cold-formed section.

Experimental and Analytical Behavior of Square CFDST Column Blind Bolted to Steel Beam Connections

Seismic Behavior of Exterior Connections with Steel Beams Bolted to Cft Columns

EXPERIMENTAL STUDY ON THE SEISMIC BEHAVIOR OF CFST RECTANGULAR COLUMN TO H-SECTION STEEL BEAM CONNECTIONS WITH EXTERNAL STIFFENERS

Static And Seismic Experiments And Analysis Models Of Blind Bolted End Plate Joints To Cft Columns

Experimental Study on Reduced I-beam to CFRST Column Joints under Cyclic Loading

Seismic Behavior of Concrete-Filled Wide Rectangular Steel Tubular (CFWRST) Stub Columns

EXPERIMENTAL INVESTIGATION AND NONLINEAR FINITE ELEMENT ANALYSIS ON THE BEHAVIOR OF CONCRETE-FILLED SQUARE STEEL TUBULAR COLUMN CONNECTIONS

Seismic Behavior of an Improved Drilled Flange Connection for I-beam to CFST Column

Seismic Behavior of a Novel Blind Bolted Flush End-Plate Connection to Strengthened Concrete-Filled Steel Tube Columns

Structural behaviour of blind bolted connection to concrete-filled steel tubular columns

Seismic experiment on blind-bolted joint in concrete-filled double steel tubular structure

Seismic Behaviour of Semi-Rigid Joints to Concrete Filled Steel Tubular Columns

Behaviour of flush end plate joints to concrete-filled steel tubular columns

BEHAVIOUR OF HYBRID STAINLESS-CARBON STEEL COMPOSITE BEAM-COLUMN JOINTS WITH BLIND BOLTS

Experimental Study on Blind Bolted Connections to Concrete-Filled Stainless Steel Columns

Seismic performance analysis of steel beam to CFST column connection with ductility and energy dissipation components

Behaviour Of Flush End Plate Connections To Concrete-Filled Tubular Columns With Blind Bolts

Behaviour of Bolted End-Plate Connections to Concrete-Filled Steel Columns

Experimental study on the seismic behaviour of the connection between concrete-filled twin steel tubes column and steel beam

Fire and post-fire performance of blind-bolted concrete-filled steel tubular joints with restrained steel beams: Experiment and simulation

Experimental Study on Axial Compressive Behavior of Concrete-Filled Corrugated Steel Tubular Columns