Seismic damage assessment of new type prefabricated concrete frame joints
Jing Dong,Yuhang Bai,Yunhe Liu,Xiaoran Cong,Changling Shen
DOI: https://doi.org/10.1016/j.jcsr.2024.108553
IF: 4.349
2024-02-23
Journal of Constructional Steel Research
Abstract:In order to evaluate the earthquake performance of new type prefabricated concrete frame joints, low-cycle loading tests were conducted on the eight specimens. The connection type and axial compression ratio were considered as the main design parameters for the above joints. The experimental failure process, characteristic loads and displacements, and ductility of the joints were analyzed. The hysteretic curve of the joint was relatively full, and the cumulative energy dissipation was 1.75 times that of the cast-in-place joint, which showed that the joints demonstrate good seismic performance. The joint specimens' surface strains and crack initiation trends were monitored through the VIC-3D system, and a strain-based damage model was defined accordingly. On the basis of the experimental results, a modified Park-Ang damage model was proposed, which was based on maximum deformation and cumulative energy dissipation. Combining experimental research, the damage process of the joint was divided into five categories: stage of no damage, initial damage stage, stable development stage of damage, rapid development stage of damage, and specimen failure stage. Corresponding quantitative indicators for each stage were provided. Moreover, the joint connection type and axial compression ratio on the seismic damage performance were analyzed comprehensively. After 10 mm, the damage index of the Z -shaped spliced joint was relatively small, with an average difference of 0.10 from the damage index of the bolted-welded joint, indicating a slower development of damage. The damage development rate of high axial compression joints ( n = 0.54) was 1.25 times that of low axial compression joints ( n = 0.18).
construction & building technology,engineering, civil