Abstract:In this study, three cationic surfactants (hexadecyltrimethylammonium chloride, hexadecyldimethylbenzylammonium chloride, and octadecyltrimethylammonium chloride) were used to modify montmorillonite and polyethylene (PE)/maleic anhydride grafted polyethylene (PE-g-MAH)/organic-montmorillonite (Org-MMT) nano-composites, prepared by two blending processes (direct-melt blending and solution blending). X-ray diffractometry and transmission electron microscopy were used to investigate the intercalation behavior and microstructure of composites. Mechanical properties were also tested. It was found that the intercalation effect of PE/PE-g-MAH/Org-MMT could be enhanced by increasing the content of PE-g-MMT, using the silicate modified by a cationic surfactant with a benzyl group or long alkyl chain, adopting the solution-blending method or using high-density polyethylene as matrix. The degree of crystallinity of composites and the crystalline thickness perpendicular to the crystalline plane [like (110) and (200)] decreased with increasing amounts of PE-g-MAH and, under certain prescription, the crystalline thickness of the composite made by the solution method was much smaller than that made by direct-melt blending. This clearly showed that Org-MMT and PE-g-MAH had a heterogeneous nucleation effect on crystallization of PE from the melt, resulting in a decrease of crystalline thickness, and the heterogeneous nucleation effect was more evident in the nanocomposite made by the solution-blending method than in that made by the direct-melt intercalation process. The tensile strength initially increased and then decreased with increasing contents of PE-g-MAH. The maximum value in tensile strength (23.3 MPa) was achieved when the concentration of PE-g-MAH was 6 wt %. The impact strength increased concomitantly with the content of PE-g-MAH; it was 122.2 J/m when the concentration of PE-g-MAH was 9 wt %. (C) 2004 Wiley Periodicals, Inc.

Impact of Titanate Coupling Agent on Properties of High Density Polyethylene Composite Filled with Coal Gangue

Effects of different treatments on the interface and mechanical properties of high density polyethylene reinforced by sericite-tridymite-cristobalite

High-density polyethylene composite filled with red mud: effect of coupling agent on mechanical and thermal properties

Effect of HDPE-g-MAH on Properties of HDPE/Graphite Thermal Conductive Composites

Polyethylene/maleic Anhydride Grafted Polyethylene/organic‐montmorillonite Nanocomposites. I. Preparation, Microstructure, and Mechanical Properties

Surface modification of phosphogypsum and application in polyolefin composites

Enhanced Interfacial, Mechanical, and Anti-Hygrothermal Properties of Carbon Fiber/cyanate Ester Composites with the Catalytic Sizing Agents of Titanium Epoxy

Modification of Granite Sawdust with Aluminum Ester Coupling Agent and Its Novel Application in High-Density Polyethylene Composite Plate

In-situ Synthesis, Thermal and Mechanical Properties of Biobased Poly(ethylene 2,5-Furandicarboxylate)/montmorillonite (PEF/MMT) Nanocomposites

The Effects of Coupling/grafting Modification of Wood Fiber on the Dimensional Stability, Mechanical and Thermal Properties of High Density Polyethylene/wood Fiber Composites

Morphology and Properties of Linear Low-Density Polyethylene Highly Loaded with Aluminum Hydroxide

The surface modification of carbon fiber for thermoplastic HDPE composites

An Effective Surface Modification of Carbon Fiber for Improving the Interfacial Adhesion of Polypropylene Composites

Interfacial and mechanical performance of chemically modified high content MWCNT/PEEK thermoplastic composites

Effects of Polyether Titanate Coupling Agent on the Flame Retardancy and Mechanical Properties of Soft Poly(vinyl Chloride)/basic Magnesium Carbonate Composites

Influence of Macromolecular Coupling Agent on Properties of PE/ATH Composite

Modified phosphogypsum used as reinforcing material in composites

High impact strength of polypropylene composites with complex titanate whiskers/multiwalled carbon nanotubes

Unsaturated Hyperbranched Polyester As a Surface Modifier of CaCO3 and Enhanced Effect on Mechanical Properties of HDPE/CaCO3 Composites

Photo-oxidation Degradation and Depth Profiles of Polyethylene-CaCO3 Composites

The Effect of Silanized Halloysite Nanotubes on the Structure of Polyethylene-Based Composite