Abstract:Biodegradable polymers have recently become attractive and have been increasingly used as matrix materials to replace fossil plastics due to concerns about the environmental issue. However, their application areas are limited due to their high costs and natural properties. In this study, we fabricated ecofriendly and economical polybutylene adipate terephthalate (PBAT) composites loaded with various concentrations of wood flour (WF) to investigate the effects on the PBAT and WF interfaces as well as the physical properties of the WF/PBAT biocomposites. Then, WF was acetylated with acetic anhydride, and the effect of WF acetylation on the mechanical and thermal properties of the biocomposites were investigated. The results showed that the tensile strength, tensile modulus, flexural strength and flexural modulus increased with WF loading in the composites, and acetylation could not only further increase these properties, but also increase the impact strength and elongation at break. The incorporation of WF would weaken the thermal stability of PBAT, but the thermal stability of the biocomposite could be improved after WF acetylation. The cold crystallization temperature and hydrophobicity of the WF/PBAT samples would be increased with the increasing load of the WF, while the melting enthalpy and the crystallinity of the samples reduced gradually. A morphological analysis of the modified composites revealed that the matrix exhibited greater interfacial interactions with the WF compared to the WF/PBAT. Considering the much lower cost of WF compared to PBAT, the improved properties of WF/PBAT biocomposites will make it economically competitive with other commercial polymers, and these biocomposites should have much wider application areas.

The Effects of Coupling/grafting Modification of Wood Fiber on the Dimensional Stability, Mechanical and Thermal Properties of High Density Polyethylene/wood Fiber Composites

Wood‐thermoplastic Composites from Wood Flour and High‐density Polyethylene

Preparation and Mechanical Properties of the Environmentally Friendly Wood-Plastic Composites

Synergistic Compatibilization and Reinforcement of Hdpe/Wood Flour Composites

The Preparation and Properties of Wood Flour/high Density Polyethylene Composites by In‐situ Reaction Extrusion

Glass fiber/wood flour modified high density polyethylene composites

Study on the Effect of Ethylene-acrylic Acid Copolymer (EAA) In-situ Grafted Wood Flour on the Properties of HDPE/Wood Plastic Composites

Effect of Interfacial Modifiers on Physical Properties and Flammability Properties of Pe/Wood Composites

Effects of Polyamide 6 Reinforcement on the Compatibility of High‐density Polyethylene/environmental‐friendly Modified Wood Fiber Composites

Mechanical properties and water absorption behavior of injection-molded wood fiber/carbon fiber high-density polyethylene hybrid composites

Effects Of Coupling Agent And Interfacial Modifiers On Mechanical Properties Of Poly(Lactic Acid) And Wood Flour Biocomposites

Effect of Interfacial Modifiers and Wood Flour Treatment on the Rheological Properties of Recycled Polyethylene/wood Flour Composites

Significant Improvement in Performance of Recycled Polyethylene/Wood Flour Composites by Synergistic Compatibilization at Multi-Scale Interfaces

Chemical Modifications of Continuous Aramid Fiber for Wood Flour/High-Density-Polyethylene Composites with Improved Interfacial Bonding

Effect of wood flour and compatibilizer content on the properties of wood-plastic composites

STUDY ON PROPERTIES OF HIGH DENSITY POLYETHYLENE/WOOD FLOUR COMPOSITES

Amide wax-assisted interfacial compatibilization of maleic anhydride-grafted polyethylene for high-performance wood-plastic composites

Combining Fiber Enzymatic Pretreatments and Coupling Agents to Improve Physical and Mechanical Properties of Hemp Hurd/Wood/Polypropylene Composite

Effect on Properties of Corn Straw Fibers Reinforced Polypropylene Composites

Optimizing the rheological and mechanical properties of ultra-highly filled wood fiber/polyethylene composites through binary alloy matrix strategy

Effects of Wood Content and Modification on Properties of Wood Flour/Polybutylene Adipate Terephthalate Biocomposites