Abstract:The light-weight, high-strength poly-ether-ether-ketone (PEEK) and its composite materials are the ideal candidate for a plethora of engineering applications. However, the inherent high viscosity and melting tem-perature of PEEK pose great challenges for the extrusion-based 3D printing process, leaving a wide knowledge gap on the properties and functionalities of novel PEEK-based composites. In this work, the PEEK/CNT composite filaments with different CNT content ranging from 1 to 7 wt% are prepared by single-screw extruder and sub-sequently printed with a custom-made high temperature 3D printer. The effects of CNT content and annealing on the mechanical strength and electrical conductivity of the 3D printed parts are investigated in detail. The tensile test result shows that the presence of CNT significantly enhances the mechanical strength of the composite. With 7 wt% CNT content, the maximum tensile strength and elastic modulus reaches 107.7 MPa and 1908.0 MPa, respectively, which amounts to a rise of 27.4% and 17.0% compared with the neat PEEK sample. The annealing treatment is similarly effective in strengthening the printed composites. The addition of CNT is also found to greatly improve the electrical conductivity to the PEEK, reaching 101 S/m for 7 wt% CNT. With such superior electrical conductivity, the printed PEEK/CNT composite sample exhibits outstanding electromagnetic inter-ference (EMI) shielding performance, reaching 32.4 dB. However, additional annealing treatment decreases the electrical conductivity as wells as EMI shielding performance. Such decrease is mainly attributed to the growth of the crystals during annealing, which expels the CNTs to the grain boundaries and leads to remarkable agglomeration, which disconnects the pervasive conductive networks. The finding in this work can provide in-sights on the new designs of PEEK composite feedstock materials and cultivate new 3D printing strategies tar-geted specifically for highly-functional, high-strength novel composites.

Interfacial and mechanical performance of chemically modified high content MWCNT/PEEK thermoplastic composites

A chemically modified MWCNT/PEEK multiscale thermoplastic composites: Forming, mechanical performance, and application

Reducing Dispersity of Mechanical Properties of Carbon Fiber/epoxy Composites by Introducing Multi-Walled Carbon Nanotubes

Engineering the Mechanical Properties of CNT/PEEK Nanocomposites

Enhanced Interfacial and Mechanical Properties of Carbon Fiber/peek Composites by Hydroxylated PEEK and Carbon Nanotubes

Preparation of PEEK/MWCNTs Composites with Excellent Mechanical and Tribological Properties

mechanical properties of CNT / PEEK nanocomposites

Enhanced Interfacial Interactions by PEEK-grafting and Coupling of Acylated CNT for GF/PEEK Composites

Enhanced interlaminar fracture toughness of CF/PEEK laminates by interleaving CNT-decorated PEEK films

In situ consolidation process-based fabrication and interlaminar modification mechanism associated with CF/PEEK multiscale nanocomposites characterized by interlaminar doping of CNTs

Enhancing CF/PEEK Interfacial Adhesion by Modified PEEK Grafted with Carbon Nanotubes

Synergistically Improving the Thermal Conductivity and Mechanical Strength of PEEK/MWCNT Nanocomposites by Functionalizing the Matrix with Fluorene Groups

Increasing the Toughness While Reducing the Viscosity of Carbon Nano-Tube/polyether Imide/polyether Ether Ketone Nanocomposites

Improving interfacial and mechanical properties of epoxy resin composites by chemical grafting modification of poly‐ether‐ether‐ketone microparticles with carbon nanotubes

Improving Compression-after-impact Performance of Carbon–fiber Composites by CNTs/thermoplastic Hybrid Film Interlayer

Effect of Carbon Nanotubes on the Mechanical Properties and Crystallization Behavior of Poly(ether Ether Ketone)

Effect of Annealing and Carbon Nanotube Infill on the Mechanical and Electrical Properties of Additively Manufactured Polyether-Ether-ketone Nanocomposites Via Fused Filament Fabrication

Synthesis and Performance of PEEK/Nap-PAEK Modified WMCNTs Composites

Preparation of MWCNTs/CF/PEEK Multi-Scale Composites with Good Mechanical and Electrical Conductivity by a Two-Step Process of AFP and Out-of-autoclave Tempering

Enhanced interfacial adhesion of CF/PEEK-titanium hybrid laminates via introducing micro-nano layers with multi-walled carbon nanotube networks

The effect of CNT grafting on the mechanical properties of the UHMWPE fiber/HDPE composite