Abstract:Proton exchange membrane fuel cells (PEMFCs) should further reduce the platinum consumption to lower their manufacturing costs and life-cycle carbon emissions. However, the performance of the catalyst layers with low-Pt loading needs to be improved. Short-side-chain (SSC) ionomers have been proven to enhance the catalytic activity of conventional catalyst layers. In this work, the SSC ionomer was applied to the electrospun catalyst layer, and achieved a remarkable improvement in the performance. With the use of commercially available catalyst, the membrane electrode assemblies (MEAs) prepared in this work exhibited a low total-Pt-consumption of 0.064 g kW -1 (stoichiometric ratios of 1.5/2.5 for H 2 /air, 80 degrees C, 100 kPa) and achieved the 2025 target proposed by the US Department of Energy. Separating activation, ohmic, and concentration overpotentials, the performance enhancement of the electrospun catalyst layer mainly came from the decrease of ohmic overpotential and concentration overpotential. The electrospun ionomer membrane without catalyst was used as a research model to explore the proton transport properties inside the electrospun catalyst layer. The results showed that in the range of PEMFC operating temperature, the proton conductivity of the electrospun catalyst layer could be higher, but meanwhile the proton-conduction activation energy was also elevated. Compared with the conventional catalyst layer, the electrospun catalyst layer showed obviously better performance before and after accelerated stress test, thus verifying the practicality of the electrospun catalyst layers. This work provided a reference for the development of low platinum and high performance catalyst layers.

Water Management Characteristics of Electrospun Micro-Porous Layer in PEMFC under Normal Temperature and Cold Start Conditions

Electrospun Fabrication and Experimental Characterization of Highly Porous Microporous Layers for PEM Fuel Cells

Cold Start Capability and Durability of Electrospun Catalyst Layer for Proton Exchange Membrane Fuel Cell

Effect of Dual Porous Layers with Patterned Wettability on Low-Temperature Start Performance of Polymer Electrolyte Membrane Fuel Cell

Performance of Polymer Electrolyte Fuel Cell under Wet/dry Conditions with Hydrophilic and Hydrophobic Electrospun Microporous Layers

Systematic Study on the Functions and Mechanisms of Micro Porous Layer on Water Transport in Proton Exchange Membrane Fuel Cells

Improvement of cold start performance of polymer electrolyte fuel cell using microporous and gas diffusion layers with patterned wettability

A review of the microporous layer in proton exchange membrane fuel cells: Materials and structural designs based on water transport mechanism

A Pem Fuel Cell Model for Cold-Start Simulations

Multi-dimensional Liquid Water Transport in the Cathode of a PEM Fuel Cell with Consideration of the Micro-Porous Layer (MPL)

High-Performance Proton Exchange Membrane Fuel Cells Enabled by Highly Hydrophobic Hierarchical Microporous Carbon Layers Grafted with Silane

Durability improvement mechanism of proton exchange membrane fuel cell by microporous layer

Electrospun Catalyst Layers Using Short-Side-chain Ionomer for Low Platinum and High Performance PEMFCs

Gradient Hydrophobic Microporous Layer for High-Performance Proton-Exchange Membrane Fuel Cells

Cold start optimization of the proton-exchange membrane fuel cell by penetrating holes in the cathode micro-diffusion layer

Effect of Micro-Porous Layer on PEM Fuel Cells Performance: Considering the Spatially Variable Properties

Enhanced Water Management in the Cathode of an Air-Breathing PEMFC Using a Dual Catalyst Layer and Optimizing the Gas Diffusion and Microporous Layers

A design of gas diffusion media for polymer electrolyte membrane fuel cell: Characterization and water management investigation

Silane-functionalized Carbon with Super-Hydrophobicity Advancing Microporous Layer for Proton Exchange Membrane Fuel Cells

An experimental study on PEMFC water management based on the synergistic interaction of flow field and MPL

Superhydrophobic Carbon Functionalized by Chemical Grafting of Fluoroalkylsilane Enables an Efficient Microporous Layer for Proton-Exchange Membrane Fuel Cells