Abstract:Inspired by the natural hollow structures, periodic lattice structures composed of hollow struts and spheres were designed and fabricated by selective laser melting (SLM) process with 316L stainless steel. Two architecture configurations with Body-Centered Cubic (BCC) and Face-Centered Cubic (FCC) symmetry were taken into consideration. Finite element (FE) simulations based on representative volume element (RVE) models and cell-assembly models were conducted to investigate the elastic response and large deformation behavior of the hollow lattice materials, respectively. Afterwards, compression experiments were carried out on an electronic universal machine and a drop hammer (DH) system to explore the quasi-static and dynamic mechanical response of the lattice specimens. The complete deformation evolutions of the lattice samples under different loading velocities were captured through high-resolution photography and inspected by the digital imaging correlation (DIC) analysis. Both the experimental research and numerical simulations demonstrated that the hollow beam cross-sections contributed to the stable crushing response of the proposed lattice structures under either quasi-static or dynamic compression. Accordingly, the post-yield behavior of the tested lattice structures was quite smooth without any fluctuations. Meanwhile, the specific strength and energy absorption of the hollow lattice structures were found to be superior to many existed lattice materials with solid struts, and comparable with the reported triply periodic minimal surface (TPMS) lattice structures. Finally, the effect of the geometric characteristic parameters on the specific mechanical properties of the lattice structures was discussed according to the supplemental analysis by numerical simulations.

Investigations of the Compressive Mechanical Properties of Open-Cell Hollow-Sphere Structures

Experimental and numerical study on compressive behavior of welded hollow spherical joints with external stiffeners

Enhanced compressive properties of additively manufactured hollow sphere materials with novel configurations

Compressive Mechanical Properties and Energy Absorption of Cubic Spherical Hollow Cellular Material Based on the Rod and Curved Surface Structure

Mechanical Properties and Energy Absorption of 3D Printed Square Hierarchical Honeycombs under In-Plane Axial Compression

Effects of Microporosity on the Elasticity and Yielding of Thin-Walled Metallic Hollow Spheres

THE MECHANICAL BEHAVIORS OF CLOSED-CELL ALUMINUM-ALLOY FOAMS WITH SPHERICAL PORES

Compression Behavior of Individual Thin-Walled Metallic Hollow Spheres with Patterned Distributions of Microporosity

Investigation into the quasi-static/dynamic combined shear-compression behaviors of three honeycomb like structures

Mechanical characterization of additively-manufactured metallic lattice structures with hollow struts under static and dynamic loadings

Elastic properties and compressive mechanical behaviour of closed-cell porous materials: Effect of microstructural morphology

Spherical porous structures for axial compression

Mechanical behaviors and failure modes of sandwich cylinders with square honeycomb cores under axial compression

Fundamental mechanical relations of open-cell metal foam composite materials with reticular porous structure

Investigations of the failure behaviors of open-cell copper foam based on in-situ X-ray tomography compression experiments and image reconstructed finite element modeling

Mechanical performances of metal-polymer sandwich structures with 3D-printed lattice cores subjected to bending load

Early Compressive Deformation of Closed-Cell Aluminum Foam Based on a Three-Dimensional Realistic Structure

A Numerical Study on the Large Deformations of Polymer Foams with Spherical Pores

An Experimental and Numerical Investigation of Compressive Response of Designed Schwarz Primitive Triply Periodic Minimal Surface with Non-Uniform Shell Thickness

Quasi-static compressive behavior and energy absorption of novel cellular structures with varying cross-section dimension

A Novel Hierarchical Thermoplastic Composite Honeycomb Cylindrical Structure: Fabrication and Axial Compressive Properties