Abstract:Although the elastic properties of porous materials depend mainly on the volume fraction of pores, the details of pore distribution within the material representative volume are also important and may be the subject of optimisation. To study their effect, experimental analyses were performed on samples made of a polymer material with a predefined distribution of spherical voids, but with various porosities due to different pore sizes. Three types of pore distribution with cubic symmetry were considered and the results of experimental analyses were confronted with mean-field estimates and numerical calculations. The mean-field 'cluster' model is used in which the mutual interactions between each of the two pores in the predefined volume are considered. As a result, the geometry of pore distribution is reflected in the anisotropic effective properties. The samples were produced using a 3D printing technique and tested in the regime of small strain to assess the elastic stiffness. The digital image correlation method was used to measure material response under compression. As a reference, the solid samples were also 3D printed and tested to evaluate the polymer matrix stiffness. The anisotropy of the elastic response of porous samples related to the arrangement of voids was assessed. Young's moduli measured for the additively manufactured samples complied satisfactorily with modelling predictions for low and moderate pore sizes, while only qualitatively for larger porosities. Thus, the low-cost additive manufacturing techniques may be considered rather as preliminary tools to prototype porous materials and test mean-field approaches, while for the quantitative and detailed model validation, more accurate additive printing techniques should be considered. Research paves the way for using these computationally efficient models in optimising the microstructure of heterogeneous materials and composites.

Effects of Microporosity on the Elasticity and Yielding of Thin-Walled Metallic Hollow Spheres

Compression Behavior of Individual Thin-Walled Metallic Hollow Spheres with Patterned Distributions of Microporosity

Stiffness, Energy Dissipation, and Hyperelasticity in Hierarchical Multilayer Composite Nanocoated Open‐Cell Polyurethane Foams

Experimental and Theoretical Study on Mechanical Properties of Porous PDMS

Elastic properties and compressive mechanical behaviour of closed-cell porous materials: Effect of microstructural morphology

The Mechanical Behavior of Porous Metal Fiber Sintered Sheets

Effect of Eccentricity Difference on the Mechanical Response of Microfluidics-Derived Hollow Silica Microspheres during Nanoindentation

An ultra-simple universal model for the effective elastic properties of isotropic 3D closed-cell porous materials

Effect of pore design on the mechanical properties of nanoporous high-entropy alloys

Surface Effects On The Elastic Modulus Of Nanoporous Materials

Cubic elasticity of porous materials produced by additive manufacturing: experimental analyses, numerical and mean-field modelling

Surface Effects on the Mechanical Properties of Nanoporous Materials.

Geometrical and mechanical characterisation of hollow thermoplastic microspheres for syntactic foam applications

The mechanical properties of a transverse isotropic voided material

Thickness Effect on Mechanical Behavior of Auxetic Sintered Metal Fiber Sheets

Effect of Porosity on Mechanical Properties of 3D Printed Polymers: Experiments and Micromechanical Modeling Based on X-Ray Computed Tomography Analysis

Effects of Porosity on Dynamic Indentation Resistance of Silica Nanofoam

A Numerical Study on the Large Deformations of Polymer Foams with Spherical Pores

Enhanced compressive properties of additively manufactured hollow sphere materials with novel configurations

THE MECHANICAL BEHAVIORS OF CLOSED-CELL ALUMINUM-ALLOY FOAMS WITH SPHERICAL PORES

Analytic solutions for effective elastic moduli of isotropic solids containing oblate spheroid pores with critical porosity