Abstract:Although the elastic properties of porous materials depend mainly on the volume fraction of pores, the details of pore distribution within the material representative volume are also important and may be the subject of optimisation. To study their effect, experimental analyses were performed on samples made of a polymer material with a predefined distribution of spherical voids, but with various porosities due to different pore sizes. Three types of pore distribution with cubic symmetry were considered and the results of experimental analyses were confronted with mean-field estimates and numerical calculations. The mean-field 'cluster' model is used in which the mutual interactions between each of the two pores in the predefined volume are considered. As a result, the geometry of pore distribution is reflected in the anisotropic effective properties. The samples were produced using a 3D printing technique and tested in the regime of small strain to assess the elastic stiffness. The digital image correlation method was used to measure material response under compression. As a reference, the solid samples were also 3D printed and tested to evaluate the polymer matrix stiffness. The anisotropy of the elastic response of porous samples related to the arrangement of voids was assessed. Young's moduli measured for the additively manufactured samples complied satisfactorily with modelling predictions for low and moderate pore sizes, while only qualitatively for larger porosities. Thus, the low-cost additive manufacturing techniques may be considered rather as preliminary tools to prototype porous materials and test mean-field approaches, while for the quantitative and detailed model validation, more accurate additive printing techniques should be considered. Research paves the way for using these computationally efficient models in optimising the microstructure of heterogeneous materials and composites.

An ultra-simple universal model for the effective elastic properties of isotropic 3D closed-cell porous materials

A highly efficient explicit constitutive model for linear viscoelastic closed-cell porous materials

A Universal Model for Predicting the Effective Shear Modulus of Two-Dimensional Porous Materials

Hyperelastic Behaviors of Closed-Cell Porous Materials at a Wide Porosity Range

Analytic solutions for effective elastic moduli of isotropic solids containing oblate spheroid pores with critical porosity

On Effective Mechanical Properties of Two-Dimensional Porous Materials

AN ELASTOPLASTIC CONSTITUTIVE MODEL FOR POROUS MATERIALS

Effects of Microporosity on the Elasticity and Yielding of Thin-Walled Metallic Hollow Spheres

Effective properties of porous materials containing saturated fluid

Numerical Evaluation of the Effect of Pores on Effective Elastic Properties of Carbon/carbon Composites

Constitutive Modeling of Neo-Hookean Materials with Spherical Voids in Finite Deformation

New Micromechanics Model for Saturated Porous Media with Connected Pores

Cubic elasticity of porous materials produced by additive manufacturing: experimental analyses, numerical and mean-field modelling

Micromechanics-Based Elastic Fields of Closed-Cell Porous Media

Elastic properties and compressive mechanical behaviour of closed-cell porous materials: Effect of microstructural morphology

Multiscale Modeling of the Effective Elastic Properties of Fluid-Filled Porous Materials

Computational Modeling Of The Elastic Property Of Three-Dimensional Open Cell Foams

Shear Stiffness of Neo-Hookean Materials with Spherical Voids

Surface Effects On The Elastic Modulus Of Nanoporous Materials

Elastic Properties of Model Porous Ceramics

Impact of Regular and Irregular Pore Distributions on the Elasticity of Porous Materials: A Microstructure-Free Finite Element Study