Abstract:The quasi-static crushing behavior of aluminum honeycomb materials is thoroughly evaluated using a combined experimental, analytical, and numerical approach. Based on experimental characterization, the constitutive properties of the honeycomb cores under flat-wise compression are approximated by an elastic perfectly plastic material with inclusion of hardening after densification. Two different cell size materials are tested and compared, and the effect of strain rate on the crushing stress is studied. The experimental results show that the crushing platen stress is directly related to the relative density of core materials, and it can be associated with the strain rate, even though the effect of strain rates is not so dominant based on the conducted quasi-static tests. A simple physical model for predicting the crushing wave length and stress is proposed and compared with the experimental data and available formulas in the literature. It is observed that the crushing wave length is close to the cell size and related to the geometric dimension and strain rate. The folding mechanism is also measured by the ARAMIS system (a photogrammetry technique), and the measured von Mises strains are compared with the numerical results from LS-DYNA, demonstrating that the folding mechanism is initiated by two plastic hinge lines formed at the cell corners. Multilayer effect is also investigated, and it indicates that including the second layer slightly decreases the maximal crushing stress, but the simple superposition is still applicable for crushing multilayer honeycomb cores with different density. Partial crushing due to small size cylindrical indenter is further studied, and the experiment shows that the partial crushing process can be described by an elastic—plastic hardening material. Side impact process of honeycomb materials is also investigated, and the collapse band and its propagation process are captured. The thorough characterization of core crushing behavior conducted in this study provides better understanding of the failure process of honeycomb materials and can be further employed to study energy absorption and impact response of sandwich structures.

Investigation into the quasi-static/dynamic combined shear-compression behaviors of three honeycomb like structures

Investigation into quasi-static compressive behaviors of several kinds of honeycomb like structures in three axial directions

Compressive Mechanical Properties and Energy Absorption of Cubic Spherical Hollow Cellular Material Based on the Rod and Curved Surface Structure

Mechanical Properties and Energy Absorption of 3D Printed Square Hierarchical Honeycombs under In-Plane Axial Compression

Quasi-static Crushing Behavior of Aluminum Honeycomb Materials

Quasi-static compressive behavior and energy absorption of novel cellular structures with varying cross-section dimension

A Novel Hierarchical Thermoplastic Composite Honeycomb Cylindrical Structure: Fabrication and Axial Compressive Properties

MECHANICAL BEHAVIOR OF 2D PERIODIC HONEYCOMBS UNDER IN-PLANE UNIAXIAL COMPRESSION

3D printed self-similar AlSi10Mg alloy hierarchical honeycomb architectures under in-plane large deformation

Study on the bending and shear properties of quasi-honeycomb sandwich structures considering the variable-density core design

Fabrication and compressive performance of novel lightweight C/SiC honeycomb for ultrahigh stability structures

Quasi-static crush behavior of aluminum hexagonal honeycomb with perforated cell walls

A Novel Hybrid Lattice Structure for Improving Compression Mechanical Properties

Influence of the Geometric Parameters on the Densification Onset Strain of Double-Walled Honeycomb Aluminum under Out-of-Plane Compression

Theoretical and Numerical Investigation of Bicellular Honeycomb under Axial Compression

Fabrication, design, and optimization of hierarchical composite Kagome honeycomb sandwich structure under uniaxial compression

Experimental and Numerical Studies on Aluminum Honeycomb with Various Cell Specifications under Impact Loading

Towards an Ideal Energy Absorber: Relating Failure Mechanisms and Energy Absorption Metrics in Additively Manufactured AlSi10Mg Cellular Structures under Quasistatic Compression

Study on the Design and Mechanical Properties of a Novel Hexagonal Cell Body Topology

Out-of-Plane Compression Behaviour of Aluminum Alloy Large-Scale Super-Stub Honeycomb Cellular Structures

Study on the Static and Dynamic Performance of Concave Triangular Honeycomb Sandwich Panels