Experimental Study on the Interaction Between Inner Air and Enveloping Membrane of Inflated Membrane Tubes

Xiaofeng Wang,Huijie Fu,Siu-seong Law,Qingshan Yang,Na Yang

DOI: https://doi.org/10.1016/j.engstruct.2020.110892

2020-01-01

Abstract:Inflated membrane tubes are popularly used as supporting members in civil engineering and aerospace engineering. The stiffness and bearing capacity of the tube originate from the tensile stress of the membrane induced by the inner air pressure. Deformation of the tube under load results in a change in this pressure and hence influences the tensile stress of the enveloping membrane and the stiffness of the tube. The latter would affect the deformation again. Such an interaction between the deformation of the enveloping membrane and the inner air pressure plays an important role in the mechanical behavior of the tube, and yet it has not received any attention according to the literature. This paper experimentally studied the air-membrane interaction of an inflated tube under both axial compression and transverse bending and its influence on the critical wrinkling load and ultimate bearing capacity with variations in the initial pressure, constraint type, axial load and slenderness ratio. A special experimental setup and test procedure were designed and developed to test the inflated tubes. The experimental results reveal quantitatively the air-membrane interaction and its significant influence on the mechanical behaviors of an inflated membrane tube which are sensitive to the four influencing factors studied. The results can be helpful to the understanding of the behavior of inflated membrane tubes with the air-membrane interaction, and may therefore improve the reliability of the tubes in civil and aerospace engineering applications.