Abstract:The interaction between an underwater explosion bubble and an elastic-plastic structure is a complex transient process, accompanying violent bubble collapsing, jet impact, penetration through the bubble, and large structural deformation. In the present study, the bubble dynamics are modeled using the boundary element method and the nonlinear transient structural response is modeled using the explicit finite element method. A new fully coupled 3D model is established through coupling the equations for the state variables of the fluid and structure and solving them as a set of coupled linear algebra equations. Based on the acceleration potential theory, the mutual dependence between the hydrodynamic load and the structural motion is decoupled. The pressure distribution in the flow field is calculated with the Bernoulli equation, where the partial derivative of the velocity potential in time is calculated using the boundary integral method to avoid numerical instabilities. To validate the present fully coupled model, the experiments of small-scale underwater explosion near a stiffened plate are carried out. High-speed imaging is used to capture the bubble behaviors and strain gauges are used to measure the strain response. The numerical results correspond well with the experimental data, in terms of bubble shapes and structural strain response. By both the loosely coupled model and the fully coupled model, the interaction between a bubble and a hollow spherical shell is studied. The bubble patterns vary with different parameters. When the fully coupled model and the loosely coupled model are advanced with the same time step, the error caused by the loosely coupled model becomes larger with the coupling effect becoming stronger. The fully coupled model is more stable than the loosely coupled model. Besides, the influences of the internal fluid on the dynamic response of the spherical shell are studied. At last, the case that the bubble interacts with an air-backed stiffened plate is simulated. The associated interesting physical phenomenon is obtained and expounded.

Nonlinear fluid-structure interaction analysis of the compression process of inflatable tube structures

Numerical analysis and experimental study on deployment process of coil-folded inflatable tube

Modelling of Concrete-Filled Filament-Wound FRP Confining Tubes Considering Nonlinear Biaxial Tube Behavior

Numerical Simulation of Whole Process and States of Tensile Membrane Structure

Deployment simulation analysis of inflatable membrane structures

Drape and Inflatable Mechanics of Membrane Inflatable Structure

Experimental Investigation of Deployment of Coil-Folded Inflatable Tube

Experimental Research on Fluid-Elastic Instability in Tube Bundles Subjected to Air-Water Cross Flow

Deployment Simulation of Inflatable Structures Based on Improved Spring-mass System

A Spring-Mass System Based Approach for Deployment Analysis of Inflatable Membrane Structures

Experimental Research on Fluid-Elastic Instability of Tube Bundles Subjected to Two-Phase Cross Flow

Simulations of Interaction Between Flow and a Thin Elastic Beam Using Cip-Based Model with Adaptive Mesh

Simulation and experimental verification on fluid-structure interaction of T-shaped pressure pipeline

Numerical Study of Flat Plate Impact on Water Using a Compressible CIP–IBM–Based Model

Transient compressible flow in a compliant viscoelastic tube

A Computationally Efficient Dynamical Model of Fluidic Soft Actuators and Its Experimental Verification

Theoretical Analysis and Numerical Simulation on the Hydraulic Expansion of Double-Layered Tubes

Fluid-structure interaction analysis and optimization study of suction valves in small refrigeration compressors

Fluid-Structure Coupling Of Linear Elastic Model With Compressible Flow Models

Nonlinear Finite Element Analysis of Inflatable Seals

Nonlinear interaction between underwater explosion bubble and structure based on fully coupled model