Abstract:Ultra-short pulse laser interaction with diamond materials has attracted extensive interest in micro- and nano-machining, especially for the fabrication of micro tools, because of the straightforward method and high precision. Thanks to the development of chemical vapor deposition (CVD) technology, high-quality CVD diamonds are employed in more varieties of tools as performance-enhancing coatings. The purpose of the experiments reported here was to explore the machinability of CVD diamond coating under the irradiation of femtosecond (fs) pulsed laser. The factor-control approach was adopted to investigate the influence of scanning speed, single pulse energy and repetition rate on the surface quality and carbon phase transition of CVD diamond coating. The material removal rate and surface roughness were evaluated. The interaction mechanism of scanning speed, single pulse energy, and repetition rate were discussed, and the fs laser ablation threshold of CVD diamond coating was calculated. It was demonstrated that two ablation mechanisms (weak and intensive) were in existence as evidenced by the distinct surface morphologies induced under different processing conditions. A strong dependence on the variation of scanning speed and pulse energy is identified in the examination of surface roughness and removal rate. Lorentzian–Gaussian deconvolution of Raman spectra illustrates that fs laser irradiation yields a strong modification effect on the coating and release the compressive stress in it. Furthermore, a newly defined parameter referring to the fs laser energies applied to unit volume was introduced to depict the degree of ablation and the Taguchi method was used to figure out the significance of different parameters. The ablation threshold of CVD diamond coating at the effective pulses of 90 is calculated to be 0.138 J/cm2.

Theoretical and Experimental Study on Machining Rectangular Microgroove of Diamond by Femtosecond Laser

Process Research on Micro-Machining Diamond Microgroove by Femtosecond Laser

Controllable Diamond Cutting of Structured Surfaces with Subnanometric Height Features on Silicon

Laser Micro Machining Of Micro-Structures On Cvd Diamond

Research on the mechanism of micromachining of CVD diamond by femtosecond laser

Study of spray-mist-assisted laser processing of micro-structures on CVD diamond surface

Research and Application Progress of Laser-Processing Technology in Diamond Micro-Fabrication

The Influence of the Focus Position on Laser Machining and Laser Micro-Structuring Monocrystalline Diamond Surface

Study on Femtosecond Laser Processing Characteristics of Nano-Crystalline CVD Diamond Coating

Influence of the grain size of CVD diamond on the thermal conductivity, material removal depth and surface roughness in nanosecond laser machining

Femtosecond laser micromachining of diamond: Current research status, applications and challenges

Surface modeling and component analysis of picosecond laser ablation of CVD diamond

Diamond Optical Vortex Generator Processed by Ultraviolet Femtosecond Laser.

Fabrication of PCD Skiving Cutter by UV Nanosecond Laser

Surface microstructuring of single crystalline diamond based on the accumulated energy homogenization in the nanosecond pulsed laser ablation

Study On Micromachining Of Polycrystalline Diamond By Uv Nanosecond Laser

Molecular dynamics simulation of laser-induced graphitization of CVD diamond

Experimental Research on Deep-And-Narrow Micromilled Grooves Using a Self-Fabricated PCD Micro-Cutter

Micro-grooving of brittle materials using textured diamond grinding wheels shaped by an integrated nanosecond laser system

Processing Microgrooves and Craters on the Surface of Wide Band Gap Mold Material Using Femtosecond Laser

Water Assisted Pulsed Laser Machining of Micro-Structured Surface on CVD Diamond Coating Tools