Abstract:Ultra-short pulse laser interaction with diamond materials has attracted extensive interest in micro- and nano-machining, especially for the fabrication of micro tools, because of the straightforward method and high precision. Thanks to the development of chemical vapor deposition (CVD) technology, high-quality CVD diamonds are employed in more varieties of tools as performance-enhancing coatings. The purpose of the experiments reported here was to explore the machinability of CVD diamond coating under the irradiation of femtosecond (fs) pulsed laser. The factor-control approach was adopted to investigate the influence of scanning speed, single pulse energy and repetition rate on the surface quality and carbon phase transition of CVD diamond coating. The material removal rate and surface roughness were evaluated. The interaction mechanism of scanning speed, single pulse energy, and repetition rate were discussed, and the fs laser ablation threshold of CVD diamond coating was calculated. It was demonstrated that two ablation mechanisms (weak and intensive) were in existence as evidenced by the distinct surface morphologies induced under different processing conditions. A strong dependence on the variation of scanning speed and pulse energy is identified in the examination of surface roughness and removal rate. Lorentzian–Gaussian deconvolution of Raman spectra illustrates that fs laser irradiation yields a strong modification effect on the coating and release the compressive stress in it. Furthermore, a newly defined parameter referring to the fs laser energies applied to unit volume was introduced to depict the degree of ablation and the Taguchi method was used to figure out the significance of different parameters. The ablation threshold of CVD diamond coating at the effective pulses of 90 is calculated to be 0.138 J/cm2.

Diamond Optical Vortex Generator Processed by Ultraviolet Femtosecond Laser.

Microfabrication Assisted by Laser-Trapped Microparticle Tools

Optical Quality Laser Polishing of CVD Diamond by UV Pulsed Laser Irradiation

Study on Femtosecond Laser Processing Characteristics of Nano-Crystalline CVD Diamond Coating

A New Diamond Machining Approach for Extendable Fabrication of Micro-Freeform Lens Array

Study of spray-mist-assisted laser processing of micro-structures on CVD diamond surface

Surface microstructuring of single crystalline diamond based on the accumulated energy homogenization in the nanosecond pulsed laser ablation

Surface Texturing of CVD Diamond Assisted by Ultrashort Laser Pulses

Growth of highly oriented graphite by ultraviolet nanosecond pulsed laser ablation of monocrystalline diamond

Ultra-short pulsed laser processing of single crystalline diamonds for tooling applications

Ablation Threshold Measurement and Chemical Modification of UV Nanosecond Laser Micromachining of Polycrystalline Diamond

Femtosecond laser micromachining of diamond: Current research status, applications and challenges

Research on the mechanism of micromachining of CVD diamond by femtosecond laser

Research and Application Progress of Laser-Processing Technology in Diamond Micro-Fabrication

Fabrication of PCD Skiving Cutter by UV Nanosecond Laser

Materials processing with tightly focused femtosecond vortex laser beams

Precision sub-monolayer manipulation of diamond surface chemistry using laser direct write oxidation in air

Direct Femtosecond Laser Surface Structuring with Optical Vortex Beams Generated by a q-plate

Experimental Parametric Investigation of Nanosecond Laser-Induced Surface Graphitization of Nano-Crystalline Diamond

Investigating Anisotropic Effects and Optimizing Parameters in Ultra-Short Pulsed (USP) Laser Machining of Single Crystalline Diamond (SCD)

Optimization of the Femtosecond Laser Machining Process for Single Crystal Diamond Using Response Surface Methodology