Abstract:Aiming at the problems of large dv/dt and di/dt in traditional single-ended converters and high electromagnetic interference (EMI) noise levels, a single-ended isolated converter using the secondary resonance technique is proposed in this paper. In the proposed converter, the voltage stress of the main power switch can be reduced and the voltage across the output diode is clamped to the output voltage when compared to the conventional flyback converter. In addition, the peak current stress through the main power switch can be decreased and zero current switching (ZCS) of the output diode can be achieved through the resonance technique. Moreover, the EMI noise coupling path and an equivalent model of the proposed converter topology are presented through the operational principle of the proposed converter. Analysis results indicate that the common mode (CM) EMI noise and the differential mode (DM) EMI noise of such a converter are deduced since the frequency spectra of the equivalent controlled voltage sources and controlled current source are decreased when compared with the traditional flyback converter. Furthermore, appropriate parameter selection of the resonant circuit network can increase the equivalent impedance in the EMI coupling path in the low frequency range, which further reduces the common mode interference. Finally, a simulation model and a 60W experimental prototype of the proposed converter are built and tested. Experimental results verify the theoretical analysis.

EMI Noise Source Reduction of Single-Ended Isolated Converters Using Secondary Resonance Technique

A Control Method Based on Minimum Conduction Losses for High Efficiency Isolated Dual-bridge Series Resonant Converters.

A Symmetrical Resonant Converter and PCB Transformer Structure for Common Mode Noise Reduction

A New ZVCS Resonant Voltage-Fed Push-Pull Converter for Vehicle Inverter Application

Analysis and Suppression of Common-Mode EMI Noise in 1 MHz 380 V-12 V DCX Converter with Low NFoM Devices

Design of Standby Control for Class-E Resonant Converter

An Isolated High Step-Up Converter Based on the Active Secondary-Side Quasi-Resonant Loops

Current-Feed Single-Switch Forward Resonant DC Transformer (DCX) with Secondary Diode-Clamping.

A Secondary Resonance Soft Switching Half Bridge DC-DC Converter with an Inductive Output Filter

Suppressing Method of Common-Mode Noise in MHz 380V-12V DCX Converter

External Magnetic Field Minimization for the Integrated Magnetics in Series Resonant Converter

A Symmetrical Control Scheme for a Resonant Switched-Capacitor Converter with Inverted Output Voltage

An Optimized Digital Synchronous Rectification Scheme Based on Time-Domain Model of Resonant CLLC Circuit

Evaluation Method of Flyback Converter Behaviors on Common-Mode Noise

An Active-Clamping Current-Fed Push-Pull Converter For Vehicle Inverter Application And Resonance Analysis

Control and Modulation of a Single-Phase AC/DC Converter with Smooth Bidirectional Mode Switching and Symmetrical Decoupling Voltage Compensation

Analysis and Design of Single-Ended Resonant Converter for Wireless Power Transfer Systems

The EMI design of low power isolated converter based on near field measure

Design of A Second Harmonic Current Based High Step-down 48V-to-1v Resonant DC-DC Converter

Study of the Resonance Phenomenon in Switching Mode Power Supply (SMPS)

Conducted EMI Mitigation Schemes in Isolated Switching-Mode Power Supply Without the Need of a Y-Capacitor