Abstract:The marine nuclear power plant is a floating nuclear power plant which supply power for the offshore oil drill platform. It is designed based on the standard and experience of the traditional onshore nuclear power plant. The reactor of the marine nuclear power plant is a 100 MWt PWR type small modular reactor with 2 loops. Each of the loops contains a main pump, a main check valve, and a steam generator. The pressurizer is set on one of the loops. The engineering safety features in the plant are somewhat different from those in the traditional plants. The special residual heat removal system, the passive residual heat removal, the square steel containment and containment suppression system are designed in the plant. The prevention and mitigation measures for severe accidents are set up on a reasonable and feasible basis to actually eliminate the large release of radioactive products. A MELCOR model and corresponding input deck were developed for the reactor coolant system, the secondary system, the containment system, the engineering safety features. Based on the safety analysis experience in the traditional nuclear power plant, the SBLOCA in the cold leg with the break diameter of 2.5 cm is chose as the initial event of the severe accident in the work. The sequence and important parameters in the accident are analyzed. According to the simulation results, the core exposed and heat up with the coolant release, and finally melt since the emergency core cooling system failure. However, the reactor pressure vessel (RPV) maintained integrity with the mitigation measure, i.e., the external vessel core cooling. The containment also maintained integrity, which prevented the large release of radioactive products to the other cabins and the environment. The work is useful in gaining an insight into the detailed process involved. One of the final goals of this work would be to identify appropriate accident management strategies and countermeasures for the SBLOCA induced severe accidents during the design process of the marine nuclear power plant.

Effect of Single and Combined Ocean Motions on a Small OFNP under SBO Accidents

Transient Thermal Behaviors of SBO Accident for a 200MW OFNP under Heaving Motion Conditions

Simulation investigation of ocean motion on small reactor based on modified system code

Numerical analysis of passive safety injection driven by natural circulation in floating nuclear power plant

Effects of Inclined Condition on LOCA for a Small Offshore Reactor with OTSG

Investigation of Severe Accident Scenario of Pwr Response to Loca along with Sbo

MELCOR Simulation of the SBLOCA Induced Severe Accident for the SMR in a Floating Nuclear Power Plant

Study of severe accident induced by sbloca for a marine nuclear power plant

Sensitivity Analysis of the SBLOCA Induced Severe Accident for a Natural Circulation Small Modular Reactors

Calculation of Natural Circulation under Heaving Motion

Development of Simulation Codes for Some Accidents in Pressurized Water Reactors

Study on Mitigation of In-Vessel Release of Fission Products in Severe Accidents of PWR

Simulation of the Small Modular Reactor Severe Accident Scenario Response to Sbo Using Melcor Code

Study of Decay Heat Removal Approach for Advanced Passive PWR During Station Blackout

A mechanistic model of a PWR-based nuclear power plant in response to external hazard-induced station blackout accidents

Safety Analysis in VVER-1000 Due to Large-Break Loss-of-Coolant Accident and Station Blackout Transient Using RELAP5/SCDAPSIM/MOD3.5

EFFECTS OF HEAVING CONDITION ON CHARACTERISTICS OF SYSTEM UNDER FORCED CIRCULATION AND NATURAL CIRCULATION

A Numerical Investigation of SBLOCA Scenario in Nuclear Heating Reactor

Multi-physics analysis of SBLOCA by coupled Neutronics/Thermal-Hydraulics full plant model

Flow Instability in Parallel Double Channels under Motion Condition Based on Modified RELAP5

Experimental Research on the Influence of Rolling Motions on the Convection Behaviors Inside Two-Layer Corium Pools