Abstract:In order to understand the effect of precipitation on the slip activities of Mg-Gd-Y-Zn-Zr alloys, the dislocation slip activities of solid-solution and as-aged alloys during ambient temperature quasi-in-situ compression were quantitatively investigated by electron backscattered diffraction (EBSD)-assisted slip trace analysis. First, slip trace analysis of both alloys showed that the β' precipitates reduced the frequency and number of grains with slip traces significantly, resulting in a pronounced precipitate-hardening behavior. At 11% strain, the aging treatment reduced the proportion of prismatic slip and second-order pyramidal slip by 4.6% and 9.3%, respectively, while the proportion of basal slip increased by 13.9%, indicating that the precipitate-hardening effect of non-basal slip was stronger than that of basal slip. Moreover, based on the slip trace statistical analysis and TEM images of the sheared β' precipitates, the critical resolved shear stress (CRSS) increments of different slip modes caused by the prismatic plate-shaped β' precipitates follow the order of Δτpyramidal-2 > Δτprismatic > Δτbasal. Also, we found the plastic inhomogeneity of solid-solution alloy during ambient temperature deformation can increase the propensity of non-basal dislocation slip and promote non-Schmid behaviors. However, a large number of fine β' precipitates dispersed in the as-aged alloy can effectively alleviate the plastic inhomogeneity in the grain-scale range during ambient temperature deformation. Further, TEM dislocation analysis under two-beam conditions shows that the abundant solute RE atoms in the solid-solution Mg-Gd-Y-Zn-Zr alloy contribute to the activity of second-order pyramidal dislocations. Therefore, we conclude that the changes in slip activity caused by the precipitation of Mg-Gd-Y-Zn-Zr alloys are mainly attributed to β' precipitates, plastic inhomogeneity, and solute RE atoms.

Precise Measurement of Strain Accommodation in a Mg-Gd-Y-Zn Alloy Using Cross-Correlation-based High Resolution EBSD

Localized dislocation interactions within slip bands and crack initiation in Mg-10Gd-3Y-0.3Zr alloy

Investigations on Microstructure and Mechanical Properties of Cast Mg-Gd-Y-Zn-Zr-Nd Alloy

The Microstructure and Mechanical Properties of As-cast Mg-10Gd-3Y-xZn-0.6Zr (x=0, 0.5, 1 and 2 Wt%) Alloys

Orientation dependence of intracrystalline and grain boundary deformation behavior in Mg-2Y using nanoindentation and CPFEM

Excellent isotropic mechanical properties of directed energy deposited Mg-Gd-Y-Zr alloys via establishing homogeneous equiaxed grains embedded with dispersed nano-precipitation

Revealing the effect of misorientation on the deformation behavior of a Mg-Y alloy from the perspective of local strain

Operating slip modes and inhomogeneous plastic deformation of Mg-10Gd-3Y-0.5Zr alloy during compression

Effect of dilute atom Gd on critical resolved shear stress and anisotropic deformation mechanism of Mg-Gd alloy

Resolving localized geometrically necessary dislocation densities in Al-Mg polycrystal via in situ EBSD

Deformation Mechanisms of Magnesium Alloys with Rare-Earth and Zinc Additions under Plane Strain Compression

Deformation mechanism of fine grained Mg–7Gd–5Y–1.2Nd–0.5Zr alloy under high temperature and high strain rates

Deformation modes and fracture behaviors of peak-aged Mg-Gd-Y alloys with different grain structures

Effects of trace Zn on the deformation mechanisms of Mg‐Gd‐Y‐Zr alloy investigated by in‐situ synchrotron diffraction

Investigation of Grain Subdivision at Very Low Plastic Strains in A Magnesium Alloy

Comparative study on dislocation slip activity of the solid-solution and as-aged Mg-9.8Gd-3.5Y-2.0Zn-0.4Zr (wt%) alloys during ambient temperature quasi-in-situ compression

Effect of Zn/(Gd+Y) ratio on the microstructure evolution and mechanical properties of Mg-Gd-Y-Zn-Zr alloy

An examination of strain ageing in a Mg–Y–Zn alloy containing Gd

A comparative study of deformation behaviors and ductility improvement in Mg–Gd–Zr and Mg–Zr cast alloys

The role of grain boundary plane in slip transfer during deformation of magnesium alloys

Quantitative Study of Residual Strain and Geometrically Necessary Dislocation Density Using HR-EBSD Method