Abstract:Taking Al-2%mole-Cu binary alloy as an example, the influence of grain orientation on competitive growth of dendrites under different competitive modes was investigated by using the three-dimensional (3-D) phase-field method. The result of phase-field simulation was verified by applying cold spray and directional remelting. In the simulation process, two competitive modes were designed: in Scheme 1, the monolayer columnar grains in multilayer columnar crystals had different orientations; while in Scheme 2, they had the same orientation. The simulation result showed that in Scheme 1, the growth of the dendrites, whose orientation had a certain included angle with the direction of temperature gradient, was restrained by the growth of other dendrites whose direction was parallel to the direction of temperature gradient. Moreover, the larger the included angle between the grain orientation and temperature gradient, the earlier the cessation of dendrite growth. The secondary dendrites of dendrites whose grain orientation was parallel to the temperature gradient flourished with increasing included angles between the grain orientation and temperature gradient. In Scheme 2, the greater the included angle between grain orientation and temperature gradient, the easier the dendrites whose orientation showed a certain included angle with temperature gradient inserted between those grew parallel to the temperature gradient, and the better the growth condition thereafter. Some growing dendrites after intercalation were deflected to the temperature gradient, and the greater the included angle, the lower the deflection. The morphologies of the competitive growth dendrites obtained through simulation can also be found in metallographs of practical solidification experiments. This implies that the two modes of competitive growth of dendrites characterized in the simulation do exist and frequently appear in practical solidification processes.

Intergrowth Mechanism and Morphology Prediction of Faceted Al3Ni Formed During Solidification by a Spatial Geometric Model

Faceted-Nonfaceted Growth Transition and 3-D Morphological Evolution of Primary Al6mn Microcrystals in Directionally Solidified Al-3 At.% Mn Alloy

Unveiling the Growth Mechanism of Faceted Primary Al2Cu with Complex Morphologies During Solidification

Unveiling the Growth and Morphological Transition Mechanisms of Al2Cu Intermetallic Compounds Quantified by Synchrotron X-ray Tomography

Continuous Morphological Transition and Its Mechanism of Al 3 Ni Phase at the Liquid–Solid Interface During Solidification

3D Morphology and Growth Mechanism of Primary Al3Ni in Directionally Solidified Al-16 Wt.% Ni Alloy

3D morphology and growth mechanism of primary Al 3 Ni in directionally solidified Al-16 wt% Ni alloy

From irregular to regular eutectic growth in the Al-Al3Ni system: in situ observations during directional solidification

Controllable 3D Morphology and Growth Mechanism of Quasicrystalline Phase in Directionally Solidified Al–Mn–Be Alloy

Effect of Cooling Rate on the 3D Morphology of the Proeutectic Al 3 Ni Intermetallic Compound Formed at the Al/Ni Interface after Solidification

Phase-field Model Simulations of Alloy Directional Solidification and Seaweed-Like Microstructure Evolution Based on Adaptive Finite Element Method

Phase-field model of isothermal solidification in multicomponent alloys for multiple grains

Phase-field Simulation of Competitive Growth of Grains in a Binary Alloy During Directional Solidification

In-Situ Observation on the Diversified Morphology and Growth Behavior of Al3Ni Phase at the Liquid Al/Solid Ni Interface

Microstructural Evolution and Growth Behavior of Intermetallic Compounds at the Liquid Al/solid Fe Interface by Synchrotron X-ray Radiography

A Full View of the Interfacial Behavior Between the Liquid Al and Solid Ni by Synchrotron Radiation

3-D Morphology and Growth Mechanism of Primary Al6Mn Intermetallic Compound in Directionally Solidified Al-3at.%Mn Alloy

A New Sight of the Growth Characteristics of Solidified Al3Ni at the Liquid–Solid Interface by Synchrotron Radiography and 3D Tomography

Modeling Dendrite Coarsening and Remelting during Directional Solidification of Al-06wt.%Cu Alloy

In Situ Study on the Growth Behavior of Primary Al 3 Ni Phase in Solidifying Al–Ni Alloy by Synchrotron Radiography

Numerical Simulation of Dendritic Growth During Directional Solidification Considering Peritectic Phase