Abstract:Intermetallic compounds have unique natures. Due to the natures of high temperature resistance, high strength and high hardness, intermetallic compounds always exist as strengthening phase in many alloys. The primary Al2Cu phase in Al-Cu alloys is an intermetallic phase. The morphology, size and distribution of intermetallic compounds phases have largely effects on the mechanical properties of materials. Morphological evolution of intermetallic compounds is necessarily theoretical basis for controlling the size, morphology and improving the performance of intermetallic compound materials in the solidification process. At present, there are many reports on. the research of Al-Cu alloys, the main research is focused on the eutectic point and 4.7%Cu (mass fraction) of Al-Cu alloys, but other composition alloys are less considered. The growth mechanism of Al2Cu phase and the primary Al2Cu phase structure of Al-Cu alloy are studied recently. However, the specific growth mechanism of Al2Cu phase is currently not very clear. Alloy composition and cooling rate are often encountered in the ordinary metal melting and solidification. The change of solidification conditions will lead to the transformation of heat and solute in the melt, which will form different morphologies. In this work, the effect of alloy composition and cooling rate on the morphologies and growth behavior of Al2Cu phase in Al-Cu alloys was studied. Through the microstructure observation of Al-xCu (x=30, 40, 45, 50, mass fraction) alloys, it was found that primary Al2Cu phase morphologies transformed from dendritic shape to regular bulk with the Cu content increased from 30% (mass fraction) to 50% in the alloy, which indicated that Al2Cu phase growth changed from non-faceted growth to faceted growth. Cooling rate also had a vital influence on primary Al2Cu phase morphologies. Under low cooling rate, primary Al2Cu phase morphologies were regular bulk. The morphologies of primary Al2Cu phases were transformed into dendritic shape with the increasing of cooling rate. The specific morphology transformation rule of primary Al2Cu phases in Al-Cu alloys was also studied in the solidification process. It was found that when Cu content was 45%, the morphology transformation of primary Al2Cu phases was from dendritic shape to square morphologies. While when Cu content was increased to 50%, the morphology transformation of primary Al2Cu phases was from dendritic shape to reticular morphologies.

Faceted-Nonfaceted Growth Transition and 3-D Morphological Evolution of Primary Al6mn Microcrystals in Directionally Solidified Al-3 At.% Mn Alloy

3-D Morphology and Growth Mechanism of Primary Al6Mn Intermetallic Compound in Directionally Solidified Al-3at.%Mn Alloy

Controllable 3D Morphology and Growth Mechanism of Quasicrystalline Phase in Directionally Solidified Al–Mn–Be Alloy

Unveiling the Growth Mechanism of Faceted Primary Al2Cu with Complex Morphologies During Solidification

Intergrowth Mechanism and Morphology Prediction of Faceted Al3Ni Formed During Solidification by a Spatial Geometric Model

Unveiling the Growth and Morphological Transition Mechanisms of Al2Cu Intermetallic Compounds Quantified by Synchrotron X-ray Tomography

Growth Behavior of Primary Intermetallic Phases and Mechanical Properties for Directionally Solidified Al-Mn-Be Alloy

3D Morphology and Growth Mechanism of Primary Al3Ni in Directionally Solidified Al-16 Wt.% Ni Alloy

Phase-field Simulation of Competitive Growth of Grains in a Binary Alloy During Directional Solidification

3D morphology and growth mechanism of primary Al 3 Ni in directionally solidified Al-16 wt% Ni alloy

3D Morphology and Formation Process of the Icosahedral Quasicrystalline Phase in Rapidly Solidified Al–Mn Alloy

Study of Faceted Al2Cu Intermetallic Compounds Growth During Solidification under Strong Static Magnetic Field Via X-ray Computed Tomography

From irregular to regular eutectic growth in the Al-Al3Ni system: in situ observations during directional solidification

Observation of Dendrite Growth Velocity and Microstructure Transition in Highly Undercooled Single Phase Alloys

Microstructure Evolution and Growth Behaviors of Faceted Phase in Directionally Solidified Al-Yalloys I. Microstructure Evolution of Directionally Solidified Al-15%Y Hypereutectic Alloy

Growth Velocity-Undercooling Relationship and Structure Refinement Mechanism of Undercooled Ni-Cu Alloys

Phase-field Model Simulations of Alloy Directional Solidification and Seaweed-Like Microstructure Evolution Based on Adaptive Finite Element Method

Effect of Cooling Rate on the 3D Morphology of the Proeutectic Al 3 Ni Intermetallic Compound Formed at the Al/Ni Interface after Solidification

Growth Behaviors of Bubbles and Intermetallic Compounds in Solidifying Al-5 Wt.% Mn Alloy

Nucleation and growth behavior of primary Al 11 Ce 3 intermetallic compounds during solidification in a hypereutectic Al-Ce alloy

Effect of Alloy Composition and Cooling Rate on the Growth Morphology of Primary Al2cu Phase in Al-Cu Alloy During Solidification