Abstract:Pitting corrosion is commonly induced in aging ships and marine structures accompanied by fatigue cracks which may be propagated under cyclic loads. The occurrence of these damages contributes to the performance deterioration of ship structures. From the perspective of safety design, it is of great engineering significance to address the residual ultimate strength of the hull plate with coupled damage of pitting corrosion and crack. In this paper, a compression test was conducted for the hull plate to measure the impact of coupled damage on the ultimate strength. An adaptive fixture is carefully designed which can simulate the boundary conditions of plates supported by real stiffeners. Additionally, the mechanical properties of AH36 steel material are determined using a tensile test. Afterward, the ultimate strength results obtained experimentally are used to verify the reliability of those achieved via nonlinear finite element analysis. Based on the basic behavior under monotonic load, a parametric study is undertaken numerically for the hull plate under cyclic load accounting for the influences of accumulative plastic damage, pitting corrosion and crack. Some interesting findings concerning the structural behavior are presented. It is found that the strength degenerates as the corrosion and crack become more serious or the cycle number increases. The influence mechanism of the plastic damage due to the cyclic load is consistent for the plates with different degrees of corrosion and crack. On the basis of 650 datasets by numerical analysis, an accurate empirical formula is proposed for predicting the residual strength of hull plate with coupled damage under cyclic load by using artificial neural networks.

Residual Strength of Damaged Stiffened Panel on Double Bottom Ship

A Strength Degradation Model of Saturated Soft Clay and Its Application in Caisson Breakwater

Experimental numerical and analytical analysis of the penetration of a scaled double-hull tanker side structure

Modified Fourier-Galerkin Solution For Aerospace Skin-Stiffener Panels Subjected To Interface Force And Mixed Boundary Conditions

Ultimate strength analysis of stiffened plate variation on double bottom of Floating Production Storage Offloading (FPSO)

Ultimate Residual Strength Prediction of Oil Tanker After Structural Damage by a Side Collision

Ultimate strength analysis of stiffened plate variation on the longitudinal bulkhead of Double Hull Oil Tanker

Experimental and numerical study of residual ultimate strength of hull plate subjected to coupled damage of pitting corrosion and crack

An Analytical Solution for Evaluating Structural Resistance of a Stiffened Plate under Lateral Impact with Large Indentation

Progressive collapse analysis and ultimate strength estimation of continuous stiffened panel under longitudinal extreme cyclic load and lateral pressure

Mechanical analysis and interior stiffeners arrangement discussion of a specific ship side collision situation

Experiment Study of Critical Dynamic Loads for Stiffened Panels under Axial Impact

Progressive Collapse Response and Ultimate Strength Evaluation of Stiffened Plates with Welding Residual Stress under Combined Biaxial Cyclic Loads and Lateral Pressure

Dynamic Ultimate Strength of Outer Bottom Stiffened Plates under In-Plane Compression and Lateral Pressure

Computational modelling of postbuckling behavior of composite T-stiffened panels with different bonding methods

Research development of buckling and ultimate strength of hull plate and stiffened panel

Experimental and numerical investigation on a double hull structure subject to collision

Residual Ultimate Strength of Hull Structures with Crack and Corrosion Damage

Elastic Buckling of Stiffened Panels in Ships under Bi-Axial Compression

Study on the Unequivalence Between Stiffness Loss and Strength Loss of Damaged Hull Girder

Strength Evaluation of Intersection Between Stiffeners and Primary Supporting Members in Double Hull Structure