Abstract:Tritium (H-3) can discharge mainly in the form of HT and/or HTO as gaseous and/or liquid waste into the environment from the nuclear power plant, and participate in the cycle among hydrosphere, atmosphere and biosphere, which would lead to the long-term radiological effects on organisms. Thus, in the daily operation of the nuclear power station, tritium became one of the most concerned nuclides in the source term analysis. In high temperature gas-cooled reactors (HTGRs), tritium was mainly generated by the ternary fission reaction of heavy nuclei in the fuel and neutron activation reaction of impurities like lithium-6 (Li-6), lithium-7 (Li-7) and boron-10 (B-10) in the graphite matrix, carbon bricks, etc. Tritium would be resorted completely in the intact tristructural-isotropic (TRISO) coated particles, while tritium in the graphite can diffuse into the primary loop depending on the local temperature. In the helium purification system of a typical HTGR, the molecular adsorber can adsorb the tritium in the primary coolant, and then the tritiated water was formed from the regeneration and desorption process of the molecular adsorber. Meanwhile, since the high permeability of tritium at a high temperature, it can permeate into the secondary loop through stainless steel heat exchange tube from the primary loop, and entered into the environment with leakage of the secondary water. Therefore, it was very important to analyze the production, transport and release mechanism of tritium for the estimation of the inventory and distribution of tritium in a nuclear power plant. With the rapid development of nuclear energy and the commercial application of HTGRs, tritiated water treatment technologies attracted more attention in the field of radioactive nuclear waste. Current paper will introduce and summarize general tritiated water treatment technologies, including water distillation, tritium sorbent process, palladium membrane reaction (PMR), and combined electrolysis catalytic exchange (CECE).

Tritium Transport Analysis for Tokamak Exhaust Processing System of Tritium Plant

Analysis of Tritium Production and Distribution in Htr-Pm

Generation and Distribution of Tritium in HTGRs and Review on the Tritiated Water Treatment Technologies

Numerical Simulation of Tritium Behavior under a Postulated Accident Condition for CFETR TEP System

Summary of Tritium Source Term Study in 10 MW High Temperature Gas-Cooled Test Reactor

Source Term Study on Tritium in HTR-PM: Theoretical Calculations and Experimental Design

Preliminary Safety Analysis of Tritium Source Term for the CFETR Tritium Plant

Tritium Transport Modeling and Analysis for HCCB Blanket of CFETR

Tritium management in ITER Test Blanket Systems port cell for maintenance operations

Source Term Analysis of Tritium in HTR-10

Tritium Safety and Confinement Loop Design of Tritium Plant in a FPP

The ITER Tokamak Exhaust Processing System Permeator and Palladium Membrane Reactor Design

Research and Measure of Tritium and Carbon 14 in HTR 10

Study on tritium permeation behavior in primary and second circuits of the hydrogen production system by methane steam reforming using HTGR

A summary of tritium behavior in nuclear power plants

TEACUP: A Tritium Management and Supplemental Core Follow Program

RESEARCH ON TRITIUM BEHAVIOR ISSUES IN HIGH-TEMPERATURE GAS-COOLED REACTORS

A Comprehensive Study of the 14C Source Term in the 10 MW High-Temperature Gas-Cooled Reactor

Overview of Tritium-Resistant Performance of Heat Transfer Tube Materials in Reactors

Analysis on Emergency Treatment Effect of Tritium Leakage Accident in the Nuclear Reactor Under Different Ventilation Conditions

Experimental study on the adsorption and desorption of tritium in the graphite materials for HTR-PM