Abstract:Tritium (H-3) can discharge mainly in the form of HT and/or HTO as gaseous and/or liquid waste into the environment from the nuclear power plant, and participate in the cycle among hydrosphere, atmosphere and biosphere, which would lead to the long-term radiological effects on organisms. Thus, in the daily operation of the nuclear power station, tritium became one of the most concerned nuclides in the source term analysis. In high temperature gas-cooled reactors (HTGRs), tritium was mainly generated by the ternary fission reaction of heavy nuclei in the fuel and neutron activation reaction of impurities like lithium-6 (Li-6), lithium-7 (Li-7) and boron-10 (B-10) in the graphite matrix, carbon bricks, etc. Tritium would be resorted completely in the intact tristructural-isotropic (TRISO) coated particles, while tritium in the graphite can diffuse into the primary loop depending on the local temperature. In the helium purification system of a typical HTGR, the molecular adsorber can adsorb the tritium in the primary coolant, and then the tritiated water was formed from the regeneration and desorption process of the molecular adsorber. Meanwhile, since the high permeability of tritium at a high temperature, it can permeate into the secondary loop through stainless steel heat exchange tube from the primary loop, and entered into the environment with leakage of the secondary water. Therefore, it was very important to analyze the production, transport and release mechanism of tritium for the estimation of the inventory and distribution of tritium in a nuclear power plant. With the rapid development of nuclear energy and the commercial application of HTGRs, tritiated water treatment technologies attracted more attention in the field of radioactive nuclear waste. Current paper will introduce and summarize general tritiated water treatment technologies, including water distillation, tritium sorbent process, palladium membrane reaction (PMR), and combined electrolysis catalytic exchange (CECE).

Analysis on Emergency Treatment Effect of Tritium Leakage Accident in the Nuclear Reactor Under Different Ventilation Conditions

Air Leakage Test of Reactor Hall Using Tracer Technique

Leak Detection Design for ITER GIS Gas Fueling Manifold

CFD Study on High-Pressure Hydrogen Leakage and Explosion of Hydrogen Energy Tram in Tunnel

Safety scenario and integrated thermofluid test

Analysis of Tritium Production and Distribution in Htr-Pm

Numerical Simulation of Tritium Behavior under a Postulated Accident Condition for CFETR TEP System

Estimation of the Equivalent Leak Rate for the Tritium Contained Pipes of ITER Gas Injection System

A Comprehensive Study of the 14C Source Term in the 10 MW High-Temperature Gas-Cooled Reactor

RESEARCH ON TRITIUM BEHAVIOR ISSUES IN HIGH-TEMPERATURE GAS-COOLED REACTORS

Summary of Tritium Source Term Study in 10 MW High Temperature Gas-Cooled Test Reactor

Numerical study of transient diffusion behavior of SF6 and He in a nuclear power plant condenser

Preliminary Safety Analysis of Tritium Source Term for the CFETR Tritium Plant

Source and Effect of Tritium from Indirect Closed Brayton Cycle with High-Temperature Gas-Cooled Reactor

A summary of tritium behavior in nuclear power plants

Experimental and Numerical Investigation of Leakage and Diffusion Accidents Based on Nuclear Energy Hydrogen Production System

Thermal-hydraulic characteristics analysis of unprotected accident and protection control strategy for helium-xenon cooled reactor system

Transient pressure analysis for the reactor core and containment of a HTGR after a primary loop pressure boundary break accident

Numerical simulation of gas diffusion and explosion limit of VOCs in containment integrated leak rate test

Fission product release and its environment impact for normal reactor operations and for relevant accidents

Generation and Distribution of Tritium in HTGRs and Review on the Tritiated Water Treatment Technologies