Abstract:The concept of biomass CaO-sorbent based Chemical Looping Gasification (CLG) have gained increasing attention for its ability of reducing CO2 emission by in situ CO2 capture, allowing for the production of a CO2-rich stream for sequestration and a high-hydrogen-content product gas. The core unit of CLG system is comprised of an interconnected dual-circulating fluidised bed reactors: the gasifier and the combustor (regenerator). Biomass feedstock is given into the gasifier, in which steam is gasifying agent and fluidizing wind, CaO sorbent could absorb CO2 generated from biomass gasification through carbonation, which changes the chemical equilibrium and strongly stimulates H2 production. In combustor, the remain char from gasifier burns with air/O2, generates the necessary heat for the CaCO3 decomposition and sensible heat delivery through bed material circulation. In this research, parametric analyses on the dual-fluidized bed system were carried out based on ASPEN Plus simulation. Gibbs free energy minimization approach was used to build the reactors model, the PB-RM is chosen as the property method. Native pine sawdust was chosen as feedstock, at a feed rate of 10 t/hr. Mass and energy coupling of two reactors are calculated by setting the combustor temperature at 900°C constantly. The compositions of the product gases, hydrogen yield & hydrogen production efficiency (HPE), cold gas efficiency (CGE) and gasifier carbon conversion ratio were correlated to the gasification operating variables, such as gasifier temperature (T), pressure (P), minimum mole ratio of CaO to carbon ([Ca]/[C]), and mole ratio of steam to carbon ([H2O]/[C]). The appropriate temperature should consider two aspects: the thermodynamics and the chemical kinetics in gasifier. The model shows that higher temperature than 700°C may not fit for H2 production because of the dramatic decrease of H2 and increase of CO2 concentration in product gas, while the model also overlooked the backward chemical kinetics under lower temperatures than 700°C, which means 700°C maybe a favourable one. Pressure study demonstrate that higher pressure than atmosphere is obviously beneficial for H2 concentration, which increased from 84.5% to 93.9% when system pressure increased from 1 bar to 3 bar. 3 bar is likely the best value for the hydrogen production, at which the hydrogen yield and HPE was up to 43.7 mol·kg and 78.5%. Higher pressure than 3 bar is in favour of CGE and H2 concentration in product gas, but not observably. Thermodynamically there is a minimum value of [Ca]/[C], which is 0.296 in this biomass case under standard operating condition, to insure the absorption of CO2 in gasifier. But in reality, researchers must consider the sorbent maximum conversion, kinetics of CO2–sorbent reaction and sorbent capacity decay during cyclic carbonation–regeneration reaction, so that higher [Ca]/[C] than the minimum is needed, e. g. unity or larger. Optimal [H2O]/[C] can be discerned around 1.25, 76.14%

Autothermal CaO Looping Biomass Gasification to Increase Process Energy Efficiency and Reduce Ash Sintering

The Evaluation of Reactive Sorption Enhanced Biogas Steam Reforming Process for Hydrogen Production Using Nano-Sized CaO Adsorbents.

Characteristic Research on CaO Sorption Enhanced Biomass Directional Entrained-Flow Gasification

Co-gasification of Acid Hydrolysis Residues and Sewage Sludge in a Downdraft Fixed Gasifier with CaO As an In-Bed Additive

Analysis on H2 production process integrated CaO/Ca(OH)2 heat storage and sorption enhanced staged gasification using calcium looping

Biomass gasification ash reutilization: Recirculation reusability and mechanism analysis

Effects of operating conditions and reactor structure on biomass entrained-flow gasification

Thermodynamic Analysis of A Biomass Anaerobic Gasification Process for Hydrogen Production with Sufficient Cao

Autothermal Pyrolysis of Lignocellulosic Biomass: Experimental, Kinetic, and Thermodynamic Studies

Simulation on Hydrogen Production from Biomass with Cao-Based Chemical Looping Gasification

Biomass-oxygen Gasification in a High-Temperature Entrained-Flow Gasifier.

A novel reutilization of ash from biomass gasification process: Feasibility and products improvement analysis

Biomass calcium looping gasification via cement-modified carbide slag in fluidized bed: an examination on enhanced multi-cycle CO2 capture and hydrogen production

Process design and thermal-calculation of a novel entrained-flow gasifier using fine ash as feedstock

Experimental Study on Autothermal Cyclone Air Gasification of Biomass

Cellulose gasification with Ca–Fe oxygen carrier in chemical-looping process

Insight into the Fe2O3/CaO-based chemical looping process for biomass conversion

Enhancement of ash properties on alkali and alkaline earth metal retention by coal additives in the gasification condition

Molten salt-modified CaO catalyzed CO2 gasification of biochar: reactivity and structural evolution

Biomass Chemical Looping Gasification of pine wood using a synthetic Fe2O3/Al2O3 oxygen carrier in a continuous unit

Catalytic biomass gasification in decoupled dual loop gasification system over alkali-feldspar for hydrogen rich-gas production