Abstract:Co-firing with high Si/Al additives has been considered as an effective method to mitigate ash-related issues of Zhundong coal during combustion. Thus, in this paper, shale char rich in Si/Al obtained from pyrolysis of oil shale was selected as an additive of Zhundong coal to investigate the AAEM migration and ash characteristics. The results revealed that after blending shale char during combustion, the sodium/calcium retention ratios reached 72%-88% and 90%-98%, respectively. When the proportion of shale char was 5%, the sodium/calcium retention ratios were the highest, and the fouling and slagging tendency was the lowest. The sodium/calcium elements in Zhundong coal were fixed in the ash by shale char, and their volatilization was inhibited. With an increase in the blending ratio of shale char, the AFTs of mixed fuels exhibited an upward trend. When the proportion of shale char increased from 0% to 25%, the ST and DT of mixed ash increased by 79°C and 150°C. Shale char had a excellent effect on enhancing the AFTs of Zhundong coal. Further, the primary minerals in Zhundong coal were mainly calcite, anhydrite and quartz, as well as a small amount of thenardite, periclase and rankinite. After blending shale char into Zhundong coal, some silicoaluminates in different forms, such as nepheline, anorthite and akermanite etc. formed during combustion. More AAEM-containing minerals in Zhundong coal transformed to aluminosilicate phase, which effectively reduced their corrosivity. During individual combustion of Zhundong coal, the ash particle presented spherical in the molten state, and formed large cluster and sintered ash (>100 μm). When the shale char was added during combustion, a large amount of refractory minerals with larger particle size generated, such as silicoaluminates or mullite. These minerals could maintain their inherent shape in large particle size rather than sintering. Likewise, the fine ash particles ( 100 μm) accounted for 80.69% at final temperature of 1150°C. When the shale char was added during combustion, the content of cluster ash decreased to less than 5%, suggesting that the slagging issues had been effectively alleviated.

Enhancement of ash properties on alkali and alkaline earth metal retention by coal additives in the gasification condition

Effect of Chemical Compositions on Ash Fusibility Characterization of a Jincheng Anthracite During Combustion and Gasification

Effects of Silicon-Aluminum Additives on Ash Mineralogy, Morphology, and Transformation of Sodium, Calcium, and Iron During Oxy-Fuel Combustion of Zhundong High-Alkali Coal

Catalytic effect of biomass ash on the hydrogasification of coal char

Investigation on the ash characteristics and AAEM migration during co-combustion of Zhundong coal and shale char in a fixed bed

Experimental Investigation on Sodium Migration and Mineral Transformation in Ash Deposit During Gasification of Zhundong Coal Using a Drop Tube Furnace

Mineral melting behavior of chinese blended coal ash under gasification condition

Ash Fluidity and Regulation Mechanism of Iron-Rich Low-Rank Coal in High-Temperature Gasification Process

Improvement of the Coal Ash Slagging Tendency by Coal Washing and Additive Blending with Mullite Generation

K2CO3-catalytic Supercritical Water Gasification of Coal with NaAlO2 Addition to Inhibit Ash Agglomeration and Decrease the Volatility of Alkali Metals

Effect of different additives on ash fusion characteristic and mineral phase transformation of iron-rich Zhundong coal

Regulation Mechanism of Ash Fusion of Iron‐Rich Coal in Xinjiang with Different Additives

Inhibition effects of wetting and corrosion behavior of high-alkali coal using typical additives under gasification conditions

Understanding Ash Sintering Variation Behaviors of Low-Rank Coals with Municipal Sludge Addition Based on Mineral Interactions

Effect of Al2O3/CaO on the melting and mineral transformation of Ningdong coal ash

Influence of Biomass Ash Additive on Reactivity Characteristics and Structure Evolution of Coal Char–CO2 Gasification

Sustainable Preparation of High-Calorific Value and Low-N and S Energy Products Through the Low-Temperature Alkali Fusion of Coal Gasification Fine Ash

Biomass gasification ash reutilization: Recirculation reusability and mechanism analysis

The mineral transformation and molten behaviors of biomass waste ashes in gasification-melting process

The influence of the high potassium biomass on the ash fusion characteristics of coal

ASH MELTING BEHAVIOR AND MINERAL TRANSITION MECHANISM UNDER GASIFICATION CONDITION