Abstract:Zhundong coal represents a large portion of China's future energy supply, because of the large reserve capacity. Although Zhungdong coal has low ash and good ignition characteristics, it also contains large amounts of sodium, which can foul and corrode heat-transfer surfaces. For economically viable use of Zhundong coal or other high-alkali coals, the alkali release must be mitigated prior to or within the burner. This can be done either by washing the coal,, using sorbents to trap the sodium, or a combination of these methods. Additive influence on the release of sodium over the entire coal combustion process was measured using a calibrated laser-induced breakdown spectroscopy (LIBS) technique. The additives used were alumina, silica, and five mineral sorbents comprising blends of silica, alumina, and various other inorganic compounds; different coal/sorbent ratios were assessed (1%, 3%, and 5% additive, by weight). During the three stages of sample coal combustion, it was found that the first stage, devolatilization, releases only similar to 1.2% of the total sodium; the char combustion stage releases similar to 28% of the total sodium; and the ash stage releases the vast majority of sodium (similar to 70%). The peak instantaneous release rate occurs during the char combustion stage. The sodium retention efficiency for all of the sorbents tested was lowest during the devolatilization stage and there was no appreciable change to the duration of the stage. Sodium retention efficiency was greatest in the ash stage, primarily due to the sheer amount of sodium released during this stage. The ash stage was effectively shortened, in proportion to the retention efficiency of the sorbent. The sodium release during the char combustion stage showed an obvious difference in profile for the various types of sorbent tested. Alumina was the least effective in reducing sodium release and retained the characteristic shape of sodium release from raw coal during this stage. Silica and sepiolite demonstrated similar sodium release profiles, which were markedly different than the sodium release profiles of either alumina or aluminosilicate mineral samples. Time-resolved sodium retention plots show an enhancement in the sodium retention by alumina during the char burnout. The addition of sodium sorbent to the coal extended the duration of the char burnout stage, which may indicate that the reduction of available sodium reduces the alkali catalysis of the char decomposition.

Inhibition effects of wetting and corrosion behavior of high-alkali coal using typical additives under gasification conditions

Effect of phosphorus-based additives on sodium release during Zhundong coal gasification in flat flame-assisted entrained flow reactor

Enhancement of ash properties on alkali and alkaline earth metal retention by coal additives in the gasification condition

Inhibition of Sodium Release from Zhundong Coal Via the Addition of Mineral Additives: Online Combustion Measurement with Laser Induced Breakdown Spectroscopy (Libs)

Effects of Sodium Carbonate and Sodium Chloride Additives on Alkaline Fusion of Coal Fly Ash

Investigation on Release and Migration Characteristics of Sodium During the Combustion of High-Sodium Coal with Phosphorite

The effects of additives on deposit formation during co-firing of high-sodium coal with high-potassium and -chlorine biomass

Inhibition of Sodium Release from Zhundong Coal Via the Addition of Mineral Additives: A Combination of Online Multi-Point LIBS and Offline Experimental Measurements

Effect of different additives on ash fusion characteristic and mineral phase transformation of iron-rich Zhundong coal

Effect of additives on flow characteristics and sodium capture efficiency of high alkali coal ash slag

Effects of phosphorous-based additive on flow properties of high silicon-aluminum coal ash

Effect of Coal Ash on the Reduction and Roasting Processes of Phosphogypsum

Experimental research on fully burning high-alkali coal in a 300 MW boiler with slag-tap furnace

Ash Fluidity and Regulation Mechanism of Iron-Rich Low-Rank Coal in High-Temperature Gasification Process

Understanding effect of phosphorus-based additive on ash deposition characteristics during high-sodium and high-calcium Zhundong coal combustion in drop-tube furnace

Experimental Investigation of the Effects of Inorganic Components on the Supercritical Water Gasification of Semi-Coke

Effect of phosphorus-based additives on ash fusion characteristics of high-sodium coal under gasification condition

Role of an additive in retarding coal oxidation at moderate temperatures

Effects of Na2CO3/Na2SO4 on catalytic gasification reactivity and mineral structure of coal gangue

Effect of Al2O3/CaO on the melting and mineral transformation of Ningdong coal ash

Research Progress on Slagging Mechanism During High Alkali Coal Combustion Process